Staffordshire · England
Bath re-enamelling & resurfacing in Dunsley, Staffordshire
Bath re-enamelling in Dunsley without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A coloured bath you want in white
- An original cast iron bath that needs restoring
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Bath re-enamelling in Dunsley without replacing anything
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We regularly repair Victorian roll-tops, pressed steel baths and cast iron baths, and common reasons people contact us are a roll-top that’s seen better days and lots of chips and rust spots.
Every repair comes with a one-year guarantee.
- Location
- Dunsley (DY7)
- County
- Staffordshire
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Dunsley and the surrounding area
Dunsley is about 3 miles west of Stourbridge, in Staffordshire. From the centre of Dunsley to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 512 places in Staffordshire, from the larger towns to small villages. We work right across the region, from Dunsley to Birmingham (about 14 miles away).
We cover every part of the DY7 postcode area and the streets around it. We regularly work on streets such as Brindley Brae, Hampton Grove and Beech Close. We also travel to Kinver (1 mile west), Whittington (1 mile south-east), Prestwood (2 miles north-east), Caunsall (2 miles south) and Compton (2 miles west). Further out, we also cover Wombourne (6 miles north), Codsall (12 miles north), Bilbrook (12 miles north), Bratch (6 miles north) and Claverley (7 miles north-west).
What’s near Dunsley
In Dunsley, that means homes near Kinver High School and Sixth Form, St Peter's Church and Brindley Heath Junior School Academy, among other places. Dunsley’s nearest station is Stourbridge Town station, about 3.3 miles east. A little further out are Lace Guild Museum (3.1 miles north-east) and Corbett Hospital (3.2 miles east). Not far away are Kinver Edge and Stourton Pit.
Places near Dunsley
Also in Dunsley
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll get on with it. Most visits take a full day, including clearing up.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s normally ready the day after.
Getting ready for the visit
- Let us know about parking or access
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Getting a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote.
Advice
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Stick to gentle, non-abrasive cleaners
- Respect the curing time we give you
- Keep toiletries on a shelf rather than in the bath
- Never use suction bath mats
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Landlords, agents and businesses in Dunsley
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we will arrange it.
Common problems we fix in Dunsley
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
Most people get in touch when they notice something like this:
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
- Enamel that’s lost its shine and feels rough
- Stains that will not shift
Comparing quotes
- How the colour is matched
- Whether a trained technician does the job
- Aftercare advice
- A fixed quote, and whether VAT is included
Common questions in Dunsley
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.
What if the damage is worse than the photos show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Anything hidden under an old coating, until we remove it
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send photos and we will give you a straight answer.
Materials we work on in Dunsley
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we take into account:
- The colour and finish to match
- Where the damage is and how we get to it
- How many items we do on one visit
- Whether it’s a chip, crack, burn or wear
What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
You can take the pictures on your phone. Just ensure we can see:
- What it’s made of, if you know
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Where you are, by postcode
If you are in Dunsley and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
