Gloucestershire · England
Bath re-enamelling & resurfacing in Dymock, Gloucestershire
Fixed-price bath re-enamelling in Dymock and the surrounding area, generally in one visit.
- Resurfacing from £350
- A coating lifting around the plughole
- Staining under the taps and around the waste
Bath re-enamelling at your home in Dymock
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. There is no removal, plumbing or tiling involved. We work on acrylic baths, basins & shower trays and cast iron baths, and people most often call us about an old resurfacing that’s failing and chips and rust in more than one place.
Every job is backed for twelve months in Dymock and everywhere else. We return to put right any problem with the work.
- Area
- Dymock (GL18)
- Region
- Gloucestershire
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What affects the price in Dymock
Prices start from £350. There is no area surcharge for Dymock. What changes the price is:
- What the surface is made of
- The colour and finish to match
- Any earlier repairs that need removing first
- The size and number of damaged areas
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so you know the cost before you book.
Send photos for a quote
Most quotes are done from pictures alone. To make it quick:
- A clear, close picture of the problem area
- Details of any past repairs
- What it’s made of, if you know
- Something in shot to show the size
To get a price, send a couple of photos through our quote form or call us. We will tell you honestly whether it can be repaired.
Nearby places to Dymock
Other services in Dymock
Why repair rather than replace?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Dust sheets down, tidy finish
- Work done at your home or business
- Most jobs done in one visit
- CHAS, Constructionline and SafeContractor accredited
See our prices page and guide to resurfacing and replacement costs.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
When a repair is not the answer
It helps to know what we can’t do too:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Dymock
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
The process
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a full day in most cases. We leave the room clean and you will know when it can be used.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the next day.
How to prepare
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Clear the area around the damage
Getting a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Common problems we fix in Dymock
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, normally first under the taps and around the waste.
Send us a photo if you notice any of these:
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
What your quote should include
- Is the price fixed, and does it include VAT?
- Aftercare advice
- If travel is included in the price
- Who will actually do the work
Dymock questions
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
Can you do the outside of a roll-top?
Yes, often. We resurface the inside, and the outside can be refinished too.
What happens once I’ve sent photos?
We come back with a fixed quote, generally with dates to choose from. You’re under no obligation.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Is my repair covered?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Do you work in Dymock?
Yes, we do. We send a technician to Dymock for every job, and the price is the same as everywhere else.
What areas do you cover?
All of Gloucestershire, and the rest of the UK. There’s no extra charge for travel.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Keeping it looking good
Once the work has cured, treat it gently:
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Do not leave a chip unrepaired
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale can’t build up.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Our work in Dymock
Dymock is about 7 miles north-east of Ross-on-Wye, in Gloucestershire. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover 470 places in Gloucestershire, from the larger towns to small villages. We work right across the region, from Dymock to Birmingham (about 41 miles away).
Postcode districts we cover here: GL18. Local streets include Western Way, Kyrleside and Winding Pool Close, and we cover them all. Nearby, we also work in The Pound (1 mile east), Botloe's Green (2 miles south-east), Much Marcle (3 miles west), Oxenhall (3 miles south) and Gorsley (3 miles south). Within a short drive, we also cover Gloucester (12 miles south-east), Tewkesbury (13 miles east), Brockworth (15 miles south-east), Quedgeley (13 miles south-east), Innsworth (12 miles south-east) and Tredworth (12 miles south-east).
Local landmarks in Dymock
Our customers here include homes close to Vell Mill Daffodil Meadow, Ann Cam Church of England Primary School and Beauchamp Arms and the streets around them. For rail, the closest station is Ledbury station, roughly 4.7 miles north of the centre. A little further out are The Shambles Museum (3.6 miles south-east) and Ellingham Castle (2.7 miles north-west). The countryside around Dymock includes Eastnor Hill.
About our accreditations · Every repair comes with a one-year guarantee.
