Wiltshire · England
Bath Re-enamelling for Dyrham homes
Bath re-enamelling across Dyrham and nearby, normally in one visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Several chips and rust patches
The process
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s normally ready the following day.
How to prepare
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
- Let us know if it has been repaired before
Ask for a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
About our bath re-enamelling in Dyrham
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We’re often asked to fix staining under the taps and around the waste and a coating lifting around the plughole, on cast iron baths, basins & shower trays and pressed steel baths.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Dyrham (SN14)
- Area hub
- Wiltshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Whether old repairs or coatings need taking off
- Where the damage is and how we get to it
- What the surface is made of
- The colour and finish to match
The price depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- A coin or ruler next to the damage for scale
- One picture of the whole bath
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.
What we are called out for in Dyrham
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
People normally call us when they notice something like this:
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- Chips and rust in more than one place
- An old resurfacing that is failing
Questions to ask before booking
- What happens if the damage is worse than the photos show
- What the guarantee covers, and for how long
- Whether they match the colour on site
- How your room will be protected
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Places near Dyrham
Also in Dyrham
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs right away
- Store bottles off the bath
- Leave the bath for the full curing time before using it
Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
Why repair rather than replace?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, normally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Why book with us
- One price list for the entire UK
- Nothing taken out or refitted
- Colours mixed by hand to suit your surface
- Rooms protected and left tidy
Take a look at our full price list or bath cost comparison.
Your questions about bath re-enamelling in Dyrham
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we will ask for another photo.
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is a repair better than a new one?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is my repair covered?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Do you come to Dyrham?
We do. Repair technicians travel to Dyrham from across the region, and the price is the same as everywhere else.
Dyrham and nearby
Dyrham is about 5 miles south of Yate, in Wiltshire. Anywhere in SN14, we come to you. Our technicians cover 425 places across Wiltshire. Our jobs stretch from Dyrham to Birmingham (72 miles away).
We cover every part of SN14 and the streets around it. Whether you live on Lower Street, Doynton Lane and Sands Hill or anywhere nearby, a technician can come to you. We also cover the places around Dyrham: Hinton (1 mile north-west), Pennsylvania (1 mile south), West Littleton (1 mile east), Cold Ashton (2 miles south-east) and Marshfield (3 miles south-east). Within a short drive, we also cover Trowbridge (13 miles south-east), Chippenham (11 miles east), Melksham (13 miles south-east), Corsham (9 miles south-east), Bradford-on-Avon (11 miles south-east) and Malmesbury (14 miles north-east).
Landmarks near Dyrham
We visit homes around Church of St Peter and Dyrham Park and the streets around them. For rail, the closest station is Yate station, roughly 4.9 miles north-west. Nearby you will also find Cossham Memorial Hospital (6 miles west) and Castle Farm Folk Museum (2.2 miles east).
About our accreditations · Every repair comes with a one-year guarantee.
