Lancashire · England
Bath re-enamelling & resurfacing in Eagland Hill, Lancashire
Problem with your bath in Eagland Hill? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A coloured bath you want in white
- Lots of chips and rust spots
How we handle bath re-enamelling in Eagland Hill
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Common call-outs are for an old resurfacing that’s failing and a dull, rough surface that won’t come clean, across pressed steel baths, Victorian roll-tops and basins & shower trays.
We stand behind the work with a one-year guarantee.
- Location
- Eagland Hill (PR3)
- Region
- Lancashire
- Warranty
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
Good habits make a big difference to how long a repair lasts:
- Keep toiletries on a shelf rather than in the bath
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
- Rinse off hair dye, oils and bath bombs right away
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
What affects the price in Eagland Hill
Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The material and finish
- Unusual colours or finishes
It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.
Getting a price from pictures
Photographing the damage takes a minute, and it saves a visit. Try to send:
- A close-up of the damage, in focus
- Natural light rather than flash
- A photo taken from further back
- The postcode, so we can plan the visit
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
What we cannot put right
To be straight with you, some problems need a different fix:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes the best part of a day. The room is left tidy and ready to use once it has cured.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the following day.
Getting ready for the visit
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Have a window or extractor fan available
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
Common problems we fix in Eagland Hill
A dull surface stains and holds dirt, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
What your quote should include
- How your room will be protected
- Who will actually do the work
- Whether the colour is mixed to match
- When it can be used again
Also near Eagland Hill
Other services in Eagland Hill
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About Eagland Hill
Eagland Hill is about 6 miles east of Thornton, in Lancashire. Clients in Eagland Hill get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Eagland Hill is one of 482 places in Lancashire where we work. We work right across the region, from Eagland Hill to Liverpool (about 34 miles away).
All of PR3 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Skitham (1 mile south), Moss Edge (1 mile south-west), Nateby (2 miles east), Ratten Row (2 miles south) and Little Eccleston (3 miles south). Larger places within reach include Preston (12 miles south-east), Lancaster (11 miles north), Lytham St Anne's (12 miles south-west), Bamber Bridge (15 miles south-east), Morecambe (12 miles north) and Fulwood (10 miles south-east).
Local landmarks in Eagland Hill
Typical jobs here are in homes near St Mark and the streets around them. Well-known places in the area include Fleetwood Hospital (5.9 miles west) and Greenhalgh Castle (4.5 miles east). Open spaces near Eagland Hill include Winmarleigh and Cockerham Moss.
Your questions about bath re-enamelling in Eagland Hill
Does re-enamelling smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Will the new finish last?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Can you quote from photos?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do you work in Eagland Hill?
Yes. We cover the entire UK and come to Eagland Hill and the rest of Lancashire. Send pictures and we’ll quote, or call 0345 017 0787.
Are there extra charges for Eagland Hill?
Travel is included in the price, and we charge the same wherever you are.
What if the damage is worse than the photos show?
Your quote covers the damage in the pictures. If there is more, we’ll tell you before starting.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Repair or replace in Eagland Hill?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Most jobs done in one visit
- Fixed prices from your pictures
- Nothing taken out or refitted
- Rooms protected and left tidy
Read our pricing and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
