Lancashire · England

Bath re-enamelling & resurfacing in Skitham, Lancashire

Full bath re-enamelling and resurfacing in Skitham, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Wear marks under the taps
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Skitham homes

How the visit works

We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and the room is left clean and tidy.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Point us to the nearest place to park
  • Tell us about parking, stairs or access
  • Let the surface dry out before the visit

How to get a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed quote, not an estimate.

Send photos for a quote

Advice

Bath re-enamelling at your home in Skitham

After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We’re often asked to fix a bath in a colour that no longer suits and worn patches where water runs and sits, on pressed steel baths, basins & shower trays and cast iron baths.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Location
Skitham (PR3)
Region
Lancashire
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

For landlords and businesses

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

How to care for the repair

How the surface is treated afterwards matters. Here’s what we suggest:

  • Do not leave bottles, razors or sponges standing on the surface
  • Avoid suction-cup mats
  • Get any chip repaired quickly
  • Rinse off hair dye, oils and bath bombs straight away

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

Questions from Skitham

Do I need to be at home?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Do you work in Skitham?

Yes. We work across the UK and travel to Skitham. Send us photos for a fixed quote, or call 0345 017 0787.

Can you fix a peeling bath coating?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Do the materials smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

I’m a tenant. Can you help?

Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Is a repair better than a new one?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

When a repair isn’t the answer

A repair is not always the answer, and we’d rather say so up front. Repairs won’t solve:

  • A poorly supported acrylic bath, until it’s firmed up
  • Plumbing leaks, which need a plumber
  • A bath split right through the body

Not sure? Send pictures and we’ll give you a straight answer before you book.

Materials we work on in Skitham

  • Cast iron baths
  • Victorian roll-tops
  • Pressed steel baths
  • Acrylic baths
  • Basins & shower trays

Prices and what affects them

Resurfacing from £350. You will know the full cost before booking. We take into account:

  • Whether old repairs or coatings need taking off
  • Doing more than one item at once
  • How much damage there is
  • Unusual colours or finishes

No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Quotes from your pictures

Two or three clear photos are normally enough. It helps if you send:

  • A coin or ruler next to the damage for scale
  • Any details about the material
  • Daylight if possible, and no flash reflection
  • Details of any past repairs

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.

Our work in Skitham

Skitham is about 5 miles north-east of Poulton-le-Fylde, in Lancashire. From the centre of Skitham to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover 482 places across Lancashire. Our jobs stretch from Skitham to Liverpool (33 miles away).

Postcode districts we cover here: PR3. We also travel to Moss Edge (1 mile west), Eagland Hill (1 mile north), Ratten Row (1 mile south), Little Eccleston (2 miles south) and Great Eccleston (2 miles south). Further out, we also cover Preston (11 miles south-east), Lancaster (12 miles north), Lytham St Anne's (11 miles south-west), Bamber Bridge (14 miles south-east), Morecambe (13 miles north) and Leyland (15 miles south-east).

Near you in Skitham

In Skitham, that means homes near Church of St John. Nearby you will also find Greenhalgh Castle (4.7 miles east). Open spaces near Skitham include Winmarleigh and Cockerham Moss.

Map of Skitham © OpenStreetMap contributors

Should you replace it?

For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.

What you get with us

  • Most jobs done in one visit
  • Nothing taken out or refitted
  • Fixed prices from your photos
  • Dust sheets down, tidy finish

See our full price list or bath cost comparison.

Do you need bath re-enamelling in Skitham?

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

The most common problems we’re called about are:

  • A bath that stays dull however much you clean it
  • A coloured bath you want in white
  • A coating lifting around the plughole
  • Stains that will not shift

Comparing quotes

  • Is the price fixed, and does it include VAT?
  • Whether the price covers travel
  • What preparation is included
  • How the room is protected while they work

Choosing a repair company

What your bath is made of matters

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.