Norfolk · England
Bath Re-enamelling for Eccles on Sea homes
Our repair technicians come to Eccles on Sea for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Wear marks under the taps
- Several chips and rust patches
Eccles on Sea and nearby
Eccles on Sea is about 8 miles east of North Walsham, in Norfolk. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Eccles on Sea is one of 797 places in Norfolk we cover.
Our visits in NR12 work the same way as everywhere else we cover. Whether you live on Abbots Way, Martin Road and Hedgehog Walk or anywhere nearby, we can come to you. Close by, we cover Whimpwell Green (1 mile west), Happisburgh Common (2 miles west), Happisburgh (2 miles north-west), Grub Street (2 miles north-west) and Walcott Green (3 miles west). Within a short drive, we also cover Great Yarmouth (15 miles south-east), Sprowston (15 miles south-west), Thorpe St Andrew (15 miles south-west), North Walsham (8 miles west), Caister-on-Sea (13 miles south-east) and Cromer (14 miles north-west).
Landmarks near Eccles on Sea
We visit homes around St Andrew's Church, among other places. Other landmarks nearby include Dilham Castle (4.7 miles west) and Stalham Firehouse Museum (3.3 miles south-west). Not far away are Hickling Broad.
How we handle bath re-enamelling in Eccles on Sea
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you are dealing with a coloured bath you want in white and worn patches where water runs and sits, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Eccles on Sea (NR12)
- Area hub
- Norfolk
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What bath re-enamelling costs
Resurfacing from £350. There is no charge for travel to Eccles on Sea. The price depends on:
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
- Doing more than one item at once
- Any earlier repairs that need removing first
A repair normally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Details of any past repairs
- Any details about the material
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
Send us pictures of the damage and a wider shot of the whole item, and tell us you are in Eccles on Sea, and we will reply with a fixed quote.
The process
Here’s how a visit typically runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Ensure the room can be ventilated
- Tell us about any previous repairs or coatings
- Plan for the room to be out of bounds to pets and children
How to get a price
If you are in Eccles on Sea and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Places near Eccles on Sea
What else we do in Eccles on Sea
Signs you need bath re-enamelling in Eccles on Sea
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Get in touch if you’ve noticed:
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- Lots of chips and rust spots
- An outdated colour you’d like to change
Before you book anyone
- How long it needs to cure
- How changes to the job are handled
- Aftercare advice
- Is the price fixed, and does it include VAT?
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Wipe the bath dry after use in hard water areas
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Questions from Eccles on Sea
Someone resurfaced my bath and it’s peeling. Can you help?
Typically, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
What happens after I send pictures?
You will get a fixed quote back, plus dates. You are under no obligation.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long does re-enamelling take?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can I add another job to the visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Materials and what they mean for the repair
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
If you manage property in Eccles on Sea, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.
What a repair can’t fix
We’d rather lose a job than do one that won’t last, so these are the limits:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we will say what we think.
Materials we work on in Eccles on Sea
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
