Highland · Scotland
Bath Re-enamelling for Edderton homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Edderton. Free, fixed quotes from your pictures.
- Resurfacing from £350
- Lots of chips and rust spots
- Wear marks under the taps
Bath re-enamelling at your home in Edderton
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Our technicians work on Victorian roll-tops, basins & shower trays and acrylic baths, and common reasons people get in touch are an old resurfacing that’s failing and stains that won’t shift.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Edderton (IV19)
- Area hub
- Highland
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Stick to gentle, non-abrasive cleaners
- Do not let dyes or oils sit on the finish
- Get any chip repaired quickly
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.
Edderton and the surrounding area
Edderton is about 21 miles north-west of Nairn, in Highland. We travel to homes and businesses in Edderton and nearby villages, so there is no workshop to go to. Edderton is one of 253 towns and villages in Highland we cover.
Postcode districts we cover here: IV19. If you’re just outside Edderton, we cover Whiteface (3 miles north), Spinningdale (4 miles north-west), Tain (5 miles east), Camore (5 miles north-east) and Dornoch (6 miles north-east). Further out, we also cover Alness (10 miles south), Invergordon (10 miles south), Golspie (12 miles north-east), Cromarty (12 miles south-east), Evanton (13 miles south-west) and Balintore (11 miles south-east). For island and remote addresses, call first so we can plan the visit.
What’s near Edderton
Around Edderton, we work in homes near Church of Scotland Parish Church, among other places. The nearest railway station is Tain station, about 4.7 miles east. Open spaces near Edderton include Struie Hill and Loch Muigh-bhlàraidh.
Other services in Edderton
Edderton questions
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens after I send pictures?
You get a fixed quote and available dates. If we need another angle, we’ll ask.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can you make a coloured bath white?
Yes, most people go for white. Mention the colour you want when you send photos.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How we price bath re-enamelling
Resurfacing from £350. There is no charge for travel to Edderton. The price depends on:
- The size and number of damaged areas
- Access to the area
- The type of damage
- The material
A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
It only takes a minute to photograph the damage. Please include:
- Natural light rather than flash
- Where you are, by postcode
- A wider photo showing the entire bath
- One sharp close-up of the damage
There’s no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The process
On the day itself, there’s little for you to do. Show us the job, point us to the room, and we will get on with it. The job generally runs to most of the day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Have somewhere for us to park nearby if possible
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Related advice
What we are called out for in Edderton
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, generally first under the taps and around the waste.
These are the problems we are asked about most:
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
- Lots of chips and rust spots
- Staining under the taps and around the waste
What your quote should include
- What protection goes down before work starts
- How changes to the job are handled
- Whether the price is fixed and includes VAT
- Who turns up on the day
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we will tell you honestly.
Materials we work on in Edderton
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Work for landlords and builders
We are used to working with agents and managing companies. Send the address, pictures and access details.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Different materials, different repairs
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
