Shropshire · England
Bath Re-enamelling in Edgebolton
Bath re-enamelling for Edgebolton, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
Bath re-enamelling in Edgebolton, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We work on cast iron baths, pressed steel baths and Victorian roll-tops, and common reasons people get in touch are staining under the taps and around the waste and a roll-top that’s seen better days.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Edgebolton (SY4)
- Region
- Shropshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What happens on the day
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
How to prepare
- Clear toiletries, mats and anything else from around the area
- Mention if the room is upstairs or in a flat
- Mention any parking restrictions or tricky access
How to get a price
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.
Advice
Repairing versus replacing in Edgebolton
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, so there’s no premium for Edgebolton. The job itself decides the price: the material, the amount of damage and how many items.
Why Edgebolton customers choose us
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Colours mixed by hand to suit your surface
Read our full price list and bath cost comparison.
What affects the price in Edgebolton
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Any earlier repairs that need removing first
- What the surface is made of
- Where the damage is and how we get to it
- Whether we combine several jobs
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Getting a price from photos
You can typically get a fixed quote without us visiting. To make it quick:
- A wider photo showing the entire bath
- Natural light rather than flash
- Details of any past repairs
- A clear, close picture of the problem area
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Nearby places to Edgebolton
More services for Edgebolton
How to look after the repair
Looking after the surface is easy:
- Use washing-up liquid and a soft cloth
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
- Don’t use the bath until it has fully cured
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Materials and what they mean for the repair
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Common problems we fix in Edgebolton
Many baths we resurface have simply been well used, with nothing wrong except the surface. The body of the bath is typically perfectly sound.
Send us a photo if you notice any of these:
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A bath in a colour that no longer suits
- Enamel that is lost its shine and feels rough
What your quote should include
- How the colour is matched
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- What protection goes down before work starts
What we cannot put right
A repair isn’t right for every job, including:
- A bath split right through the body
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Edgebolton
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Edgebolton and nearby
Edgebolton is about 8 miles north-east of Shrewsbury, in Shropshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Edgebolton is one of 433 towns and villages in Shropshire we cover. We work right across the region, from Edgebolton to Birmingham (about 38 miles away).
Here we cover the SY4 postcode area. Neighbouring places we cover include Moreton Mill (1 mile north), Shawbury (1 mile south-west), Walton (2 miles south-east), High Ercall (3 miles south) and Astley (3 miles south-west). We also work in nearby towns such as Shrewsbury (8 miles south-west), Madeley (13 miles south-east), Market Drayton (10 miles north-east), Coleham (8 miles south-west), Kingsland (8 miles south-west) and Whitchurch (12 miles north).
Local landmarks in Edgebolton
Our clients here include homes close to Church of St Mary the Virgin, among other places. The nearest railway station is Yorton station, about 4.6 miles west. Other landmarks nearby include Moreton Corbet Castle (1.2 miles north-west).
Your questions about bath re-enamelling in Edgebolton
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is the work guaranteed?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
About our accreditations · Every repair comes with a one-year guarantee.
