Greater London · England
Bath Re-enamelling for Elephant and Castle homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Elephant and Castle. Free, fixed quotes from your photos.
- Resurfacing from £350
- Several chips and rust patches
- Thin, worn enamel in places
Repair or replace: which is better?
Replacing a bath generally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and typically one day, with the bath ready the next day. Prices start from £350. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Fixed prices from your photos
- Dust sheets down, tidy finish
- Work done at your home or business
- Accredited with CHAS, Constructionline and SafeContractor
See our pricing and guide to resurfacing and replacement costs.
How we handle bath re-enamelling in Elephant and Castle
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. We work on pressed steel baths, basins & shower trays and Victorian roll-tops, and people most frequently call us about stains that won’t shift and wear marks under the taps.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Elephant and Castle (SE1, SE17, SE11)
- Area hub
- Greater London
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- What the surface is made of
- The size and number of damaged areas
- What kind of damage it is
- Previous DIY repairs that have to come out
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
How to get a fixed quote
When you take your photos, these tips help us give you a firm price:
- Natural light rather than flash
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
There’s no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Common problems we fix in Elephant and Castle
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
Send us a picture if you notice any of these:
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
What your quote should include
- How the colour is matched
- What preparation is included
- How long it needs to cure
- How to look after the finish
The process
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, do the job and tidy away. Allow a full day from start to finish. Before we go, we will explain how long to leave it and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Make sure the room can be ventilated
- Let us know if it has been repaired before
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About Elephant and Castle
Elephant and Castle is about 1 mile south-west of London, in Greater London. Book a date that suits you, and we’ll give you an arrival time in advance, so there’s no waiting around. We work in all 764 towns and villages across Greater London.
Our visits in SE1, SE17 and SE11 work the same way as everywhere else we cover. That includes homes on Dante Road, Oakey Lane and Ash Avenue. Elephant and Castle is on the A300 and A302, which makes it straightforward to reach. We also cover the places around Elephant and Castle: Newington Butts (1 mile south), St George's Fields (1 mile north-west), Vauxhall (1 mile west), Lambeth (1 mile west) and Kennington (1 mile south-west). Within a short drive, we also cover City of Westminster (3 miles north-west), Marylebone (3 miles north-west), Kensington (4 miles west), Walthamstow (7 miles north-east), Hoxton (3 miles north) and Hampstead (5 miles north-west).
Near you in Elephant and Castle
Typical jobs here are in homes near Lambeth Palace Library, London College of Communication and Notre Dame Roman Catholic Girls' School, among other places. Also close by are Newington Gardens (under half a mile north-east), St Jude's Church of England Primary School (within half a mile north-west), The Rockingham Arms (less than half a mile north-east) and Metropolitan Tabernacle (under half a mile south). Elephant and Castle has its own railway station: Elephant & Castle station. Other landmarks nearby include The Walworth Clinic (within half a mile south-east) and City and Liberty of Westminster (1.2 miles west). Green spaces nearby include Bellenden Road Nature Garden and St. James's Park Lake.
Places near Elephant and Castle
Also in Elephant and Castle
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Honest limits
We will not take on work that will not last, so here’s what a repair can’t put right:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
How to care for the repair
After the repair has cured, a few habits help it last:
- Clean with a soft cloth and mild detergent
- Have chips seen to early
- Avoid suction-cup mats
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Do not try to scrub a worn bath back to shine. It removes more of the surface.
Elephant and Castle questions
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Is there a call-out fee?
There is no separate call-out charge. The fixed price covers the visit and the work.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send photos.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the price change on the day?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
