Staffordshire · England

Bath re-enamelling & resurfacing in Lutley, Staffordshire

Our repair technicians come to Lutley for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Lots of chips and rust spots
  • An old resurfacing that’s failing
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Lutley

Bath re-enamelling at your home in Lutley

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Typical jobs include an outdated colour you’d like to change and brown or grey marks that don’t clean off, on pressed steel baths, acrylic baths and basins & shower trays.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Area
Lutley (DY7)
Region
Staffordshire
Cover
12 months on all our work
Price
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

Repairing versus replacing in Lutley

There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.

Why us?

  • We will tell you if it’s not worth repairing
  • CHAS, Constructionline and SafeContractor accredited
  • One visit for most repairs
  • Technicians who travel to you, UK-wide

Take a look at our pricing or bath cost comparison.

Lutley questions

How do I get a price for bath re-enamelling in Lutley?

Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Can you change the colour of my bath?

Yes, most people go for white. Tell us what you’d like when you ask for a quote.

How long will the bath be out of use?

Usually one day, with the bath ready the following day. Deeply pitted baths may need a second day.

It’s been repaired before. Can you still fix it?

Most of the time. Tell us what was done before.

What happens if you find more damage?

If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

Is it safe with children and pets around?

Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

What we cannot put right

A repair isn’t right for every job, for example:

  • Damage hidden under a previous coating, until it’s stripped back
  • A poorly supported acrylic bath, until it’s firmed up
  • A bath that is rusted through

Not sure? Send pictures and we’ll give you a straight answer before you book.

Surfaces we repair

  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops

The process

Arrival times are agreed in advance. Once we’re there, the work takes the best part of a day for most jobs. The room is left tidy and you’ll know when it can be used.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the following day.

How to prepare

  • Keep a parking space free if you can
  • Make sure the room can be ventilated
  • Tell us if there are stairs or a lift

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.

Get a fixed quote

Read more

Keeping it looking good

Looking after the surface is easy:

  • Dry the bath after use to stop limescale
  • Respect the curing time we give you
  • Fix dripping taps quickly
  • Store bottles off the bath

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.

When to call us in Lutley

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That is the point where re-enamelling makes sense.

These are the problems we’re asked about most:

  • Staining under the taps and around the waste
  • A coloured bath you want in white
  • A peeling or bubbling previous coating
  • An original cast iron bath that needs restoring

Questions to ask before you book

  • How changes to the job are handled
  • When it can be used again
  • Who will actually do the work
  • The length of the guarantee and what it covers

How to compare quotes

About Lutley

Lutley is about 4 miles south-west of Wombourne, in Staffordshire. Across the DY7 area, we carry out the work at your property. Lutley is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Lutley to Birmingham (16 miles away).

All of DY7 is within our area, from the main roads to the quietest streets. Nearby, we also work in Four Ashes (1 mile south-west), Enville (1 mile south-east), Coxgreen (2 miles south), Compton (2 miles south) and Prestwood (3 miles south-east). Larger places within reach include Wombourne (4 miles north-east), Great Wyrley (15 miles north-east), Codsall (10 miles north), Littlewood (15 miles north-east), Cheslyn Hay (15 miles north-east) and Brewood (13 miles north).

Near you in Lutley

We visit homes around Church of the Holy Cross and the streets around them. A little further out are Stourton Castle (3.6 miles south-east) and Wordsley Hospital (4.8 miles east). The countryside around Lutley includes Stourton Pit and Kinver Edge.

Map of Lutley © OpenStreetMap contributors

What affects the price in Lutley

Prices start from £350. Quotes are free and the price is fixed. What we look at:

  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • The material and finish
  • How many items we do on one visit

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

How to get a fixed quote

When you take your pictures, these tips help us give you a firm price:

  • Any earlier repairs or coatings
  • One sharp close-up of the damage
  • Your postcode, so we can check dates
  • Good light, ideally daylight, without flash glare

There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.