Northumberland · England
Bath re-enamelling & resurfacing in Fenwick, Northumberland
Bath re-enamelling in Fenwick without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- Lots of chips and rust spots
What we’re called out for in Fenwick
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
People typically call us when they notice something like this:
- An old resurfacing that is failing
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
- Staining under the taps and around the waste
What your quote should include
- What prep work is covered
- How to care for the finish
- The length of the guarantee and what it covers
- How long it needs to cure
Bath re-enamelling at your home in Fenwick
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. Our technicians work on cast iron baths, Victorian roll-tops and acrylic baths, and people most often call us about stains that won’t shift and several chips and rust patches.
Every repair comes with a one-year guarantee, wherever you are in Northumberland.
- Area
- Fenwick (TD15)
- Area hub
- Northumberland
- Guarantee
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
We will always be straight with you, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
Send us pictures and we’ll tell you honestly.
Materials we work on in Fenwick
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Prices and what affects them
Resurfacing from £350. There’s no area surcharge for Fenwick. The price reflects:
- Unusual colours or finishes
- How much damage there is
- The material and finish
- The type of damage
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- Natural light rather than flash
- The material, if you know it
- Your postcode, so we can check dates
- Any earlier repairs or coatings
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Landlords, agents and businesses in Fenwick
If you manage property in Fenwick, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access.
Your questions about bath re-enamelling in Fenwick
Will it make a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Can a failed resurfacing be redone?
Usually, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is repairing better than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Nearby places to Fenwick
What else we do in Fenwick
What happens on the day
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow the best part of a day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the day after.
How to prepare
- Keep pets and children out of the room while we work
- Let us know about parking or access
- Mention any earlier repairs or resurfacing
Get a quote
If you’re in Fenwick and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Advice
How to look after the repair
How the surface is treated afterwards matters. Here’s what we suggest:
- Fix dripping taps quickly
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Fenwick and nearby
Fenwick is about 9 miles south-east of Berwick-upon-Tweed, in Northumberland. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 189 towns and villages across Northumberland, from the larger towns to small villages. Our jobs stretch from Fenwick to Newcastle upon Tyne (47 miles away).
Postcode districts we cover here: TD15. If you’re just outside Fenwick, we cover Lowick (3 miles west), Middleton (4 miles south-east), Holy Island (4 miles east), Belford (5 miles south-east) and Waren Mill (6 miles south-east). We also work in nearby towns such as Berwick-upon-Tweed (9 miles north-west), Coldstream (14 miles west), Wooler (9 miles south-west), Seahouses (11 miles south-east), East Ord (9 miles north-west) and Spittal (8 miles north-west).
What’s near Fenwick
Around Fenwick, we work in homes near Church of St Nicholas and the streets around them. Well-known places in the area include Fenham Castle (1.4 miles east). Open spaces near Fenwick include Holburn Lake and Moss.
About our accreditations · Every repair comes with a one-year guarantee.
