Wrexham · Wales
Bath re-enamelling & resurfacing in Moss, Wrexham
Full bath re-enamelling and resurfacing for homes and businesses in Moss and across Wrexham. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- Stains that won’t shift
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Bath re-enamelling in Moss, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with a coating lifting around the plughole and stains that won’t shift, we can usually put it right, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
All our work comes with our one-year guarantee, wherever you are in Wrexham.
- Where
- Moss (LL11, LL12)
- Region
- Wrexham
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
How the visit works
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. Allow the best part of a day, and we’ll tell you if anything changes.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Open a window if you can
Get a quote
To get a price, send a couple of pictures through our quote form or call us. We’ll say right away if a repair is the right fix.
Read more
Also in Moss
What your bath is made of matters
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Where we work around Moss
Moss is about 3 miles north-west of Wrexham, in Wrexham. From the centre of Moss to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 115 places across Wrexham. Our jobs stretch from Moss to Liverpool (23 miles away).
All of LL11 and LL12 is covered, from the main roads to the quietest streets. You will find streets such as New Road, Top Road and Long Lane, and we cover them all. We also travel to Pentre Broughton (1 mile south), Brymbo (1 mile west), Gwersyllt (1 mile east), Little Mountain (1 mile south-east) and Brynteg (1 mile south). Within a short drive, we also cover Wrexham (3 miles south-east), Caia Park (3 miles south-east), Offa (3 miles south-east), Rhosllannerchrugog (5 miles south), Acton (3 miles south-east) and The Dunks (3 miles south-east).
Around Moss
Locally, our jobs take us to homes close to Grapes Inn, Black Lane C.P. School and Ysgol Bryn Alyn, among other places. Other local landmarks include Holy Trinity Church (0.7 miles east) and Ysgol Bryn Alyn (0.6 miles east). The closest station to Moss is Gwersyllt station, about 0.9 miles east. Well-known places in the area include Tŷ Pawb (2.8 miles south-east) and Cae Twmpath Fieldname 2 (1.4 miles south-west). Not far away are Cefn and Brymbo Pool.
Can I fix it myself?
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What we cannot put right
Some jobs aren’t right for a repair, including:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
What affects the price in Moss
Prices start from £350. You will not pay by the hour. The price depends on:
- Whether old repairs or coatings need taking off
- How many items we do on one visit
- The colour and finish to match
- The material and finish
No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed price
You can take the photos on your phone. Just ensure we can see:
- A clear, close picture of the problem area
- A wider photo showing the entire bath
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
Most clients in Moss get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Keeping it looking good
Simple care helps the repair last. We recommend:
- Clean with a soft cloth and mild detergent
- Keep suction mats out of the bath
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Repair or replace: which is better?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, with the bath back in use the following day. Prices start from £350. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- A fixed quote before booking
- Repair technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- One-year guarantee on every repair
Read our pricing and resurfacing vs replacement cost guide.
Questions from Moss
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Will there be fumes?
Yes, while we’re applying the finish. Ventilation keeps it down, and it fades as the finish cures.
What if the damage is worse than the pictures show?
Your quote covers the damage in the photos. If there is more, we’ll tell you before starting.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Wrexham.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
It’s been repaired before. Can you still fix it?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
About our accreditations · Every repair comes with a one-year guarantee.
