Moray · Scotland
Bath Re-enamelling in Findochty
Bath re-enamelling in and around Findochty: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- Stains that will not shift
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Findochty as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
Bath re-enamelling in Findochty without replacing anything
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. You end up with a smooth, glossy surface. If you are dealing with lots of chips and rust spots and a bath that stays dull however much you clean it, we can typically put it right, whatever the material.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Area
- Findochty (AB56)
- Region
- Moray
- Cover
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
The process
Here’s how a visit typically runs: we arrive on time, sheet and mask the area around the job, do the job and tidy away. Allow most of the day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Open a window if you can
- Let the surface dry out before the visit
- Tell us about parking, stairs or access
How to get a price
For a price in Findochty, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
What else we do in Findochty
Aftercare tips
To keep it looking its best:
- A dripping tap should be fixed promptly
- Don’t leave a chip unrepaired
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Honest limits
Before you book, it’s worth knowing the limits:
- Leaking taps or wastes (a plumber’s job)
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we work on in Findochty
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Covering Findochty
Findochty is about 3 miles north-east of Buckie, in Moray. Whether you’re in the middle of Findochty or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. We cover all 58 towns and villages in Moray.
We cover every part of AB56. From Main Street, Station Road and Blantyre Terrace or anywhere nearby, a technician can come to you. Being close to the A942 and B9020, Findochty is easy for our repair technicians to reach. We also cover the places around Findochty: Buckpool (1 mile north), Portknockie (2 miles east), Portessie (2 miles south-west), Rathven (2 miles south-west) and Ianstown (2 miles south-west). Within a short drive, we also cover Lossiemouth (14 miles west), Keith (11 miles south), Ashgrove (15 miles west), Cullen (3 miles east), Fochabers (9 miles south-west) and Lhanbryde (12 miles west). If you’re somewhere remote, call first so we can plan the visit.
Near you in Findochty
Typical jobs here are in homes near Church Of Scotland. A little further out are Findochty Castle (0.6 miles south-west) and Seafield Hospital (3.5 miles south-west).
What affects the price in Findochty
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Where the damage is and how we get to it
- Previous DIY repairs that have to come out
- Whether we combine several jobs
- The material
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access.
How to get a fixed price
You can generally get a fixed quote without us visiting. To help us price it:
- A photo taken from further back
- Any earlier repairs or coatings
- Where you are, by postcode
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it does not work out, we can still repair it properly.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Findochty clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- Fixed prices from your photos
- Colour mixed on the day to match
- One visit for most repairs
See our prices page or resurfacing vs replacement cost guide.
Do you need bath re-enamelling in Findochty?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
If you can see any of these, send us a photo:
- A bath that stays dull however much you clean it
- An original cast iron bath that needs restoring
- A coloured bath you want in white
- Thin, worn enamel in places
Comparing quotes
- How soon you can use it again
- What protection goes down before work starts
- Whether they match the colour on site
- What happens if the damage is worse than the photos show
Questions from Findochty
Are there extra charges for Findochty?
No. Our quotes include travel, with the same prices everywhere we work.
It’s been repaired before. Can you still fix it?
Generally, yes. The old repair comes out first, so mention it when you send pictures.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Is there a guarantee?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
How do I book?
Just photos, your postcode and a contact number. On the day, access to the room.
Which areas do you work in?
Everywhere in the UK, Findochty included. There’s no extra charge for travel.
Can you repair several things at once?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you will get one combined price.
About our accreditations · Every repair comes with a one-year guarantee.
