Moray · Scotland
Bath Re-enamelling for Lhanbryde homes
We travel to Lhanbryde for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- Brown or grey marks that don’t clean off
Covering Lhanbryde
Lhanbryde is about 4 miles east of Elgin, in Moray. Clients in Lhanbryde get the same service as everywhere else we cover: a fixed quote from photos, and a technician at your door on the day. Lhanbryde is one of 58 towns and villages in Moray we cover.
Our repair technicians cover all of the IV30 postcode area and the streets around it. Local streets include Station Road, Garmouth Road and Gilliebog Place, all of which we cover. Neighbouring places we cover include Urquhart (1 mile north-east), Blackhills (1 mile south), Hallowood (2 miles west), Lochhill (2 miles north) and Ashgrove (3 miles west). Larger places within reach include Elgin (4 miles west), Buckie (10 miles east), Forres (15 miles west), Lossiemouth (6 miles north-west), Keith (12 miles south-east) and Portknockie (14 miles east). Some remote addresses need extra planning, so call us to arrange it.
Around Lhanbryde
In Lhanbryde, that means homes near Old Parish Church and Burial Ground and Lhanbryde Primary School and the streets around them. The nearest railway station is Elgin station, about 3.6 miles west. Nearby you will also find Dr Gray's Hospital (4.2 miles west) and Elgin Cathedral Museum (3.5 miles west). Green spaces nearby include Loch Spynie and Findlay's Seat.
About our bath re-enamelling in Lhanbryde
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for a bath that stays dull however much you clean it and a roll-top that’s seen better days, in acrylic baths, cast iron baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Where
- Lhanbryde (IV30)
- Area hub
- Moray
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Lhanbryde questions
Do you cover Lhanbryde?
Yes, we do. We send a technician to Lhanbryde for every job, with no extra charge for travel.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What areas do you cover?
Everywhere in the UK, Lhanbryde included. Travel is included in the price.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Signs you need bath re-enamelling in Lhanbryde
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
Send us a photo if you notice any of these:
- Wear marks under the taps
- Several chips and rust patches
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
Comparing quotes
- Whether the price covers travel
- Who turns up on the day
- What prep work is covered
- What aftercare is recommended
More services for Lhanbryde
For landlords and businesses
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which matters when someone is living in the home.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
The process
We agree an arrival time beforehand, so you know when to expect us. On site, it takes a full day in most cases. We leave the room clean.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Have a window or extractor fan available
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Get a quote
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Related advice
DIY kit or professional repair?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Looking after it afterwards
To keep it looking its best:
- Wipe the bath dry after use in hard water areas
- Store bottles off the bath
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Should you replace it?
Replacing the bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Our bath re-enamelling starts from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- No need to remove anything
- One visit for most repairs
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
Read our pricing or guide to resurfacing and replacement costs.
When a repair is not the answer
In fairness, there are a few things a repair will not fix:
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
- Holes rusted through the metal
Send us photos and we will tell you honestly before you book.
What we work on
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
