Moray · Scotland
Bath Re-enamelling in Lossiemouth
Bath re-enamelling across Lossiemouth and nearby, done in a single visit in most cases.
- Resurfacing from £350
- An outdated colour you’d like to change
- A coating lifting around the plughole
Landlords, agents and businesses in Lossiemouth
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
How we handle bath re-enamelling in Lossiemouth
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. We’re often asked to fix an original cast iron bath that needs restoring and several chips and rust patches, on cast iron baths, basins & shower trays and Victorian roll-tops.
Big or small, it’s backed by a one-year guarantee.
- Location
- Lossiemouth (IV31)
- Region
- Moray
- Guarantee
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Lossiemouth. The job itself decides the price: the material, the amount of damage and how many items.
Why Lossiemouth clients choose us
- Colour mixed on the day to match
- Straight answers about what a repair can do
- We leave the room as we found it
- Nothing taken out or refitted
See our prices page or guide to resurfacing and replacement costs.
When we’d advise against a repair
We’ll always be straight with you, so here’s what a repair cannot fix:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before booking.
Materials we work on in Lossiemouth
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
Also in Lossiemouth
Keeping it looking good
So the finish stays in good condition:
- Have chips seen to early
- Don’t use the bath until it has fully cured
- Use washing-up liquid and a soft cloth
- Wipe the bath dry after use in hard water areas
Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Let the surface dry out before the visit
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
Ask for a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
What bath re-enamelling costs
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- How easy the damage is to reach
- What kind of damage it is
- The material
- The colour and finish to match
Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
It only takes a minute to photograph the damage. Please include:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Details of any past repairs
- A picture taken from further back
If you are in Lossiemouth and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Where we work around Lossiemouth
Lossiemouth is about 5 miles north of Elgin, in Moray. Anywhere in IV31, we come to you. Lossiemouth is one of 58 places in Moray where we work.
Postcode districts we cover here: IV31. From High Street, School Brae and Ramsay Lane or anywhere nearby, a technician can come to you. Main roads around Lossiemouth include the A941 and B9040, so getting to you is simple. We also cover the places around Lossiemouth: Muirton (1 mile south), Covesea (2 miles west), Duffus (4 miles west), Elgin (5 miles south) and Lochhill (5 miles south-east). Further out, we also cover Buckie (12 miles east), Forres (14 miles south-west), Ashgrove (5 miles south), Burghead (7 miles west), Fochabers (10 miles south-east) and Findochty (14 miles east). Lossiemouth is among the bigger towns we cover in Moray. For island and remote addresses, ring us first and we’ll plan the trip.
Landmarks near Lossiemouth
In Lossiemouth, that means homes near Lossiemouth High School, Branderburgh and James Square. Well-known places in the area include Lossiemouth Fisheries and Community Museum (0.6 miles north-east) and Kinneddar Castle (0.6 miles south-west). Not far away are Loch Spynie.
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Do you need bath re-enamelling in Lossiemouth?
Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. We strip what’s failing and start again.
Look out for any of the following:
- An original cast iron bath that needs restoring
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
Before booking anyone
- Whether they match the colour on site
- What the guarantee covers, and for how long
- What happens if they find more damage
- Whether cleaning and preparation are in the price
Lossiemouth questions
How much does bath re-enamelling cost in Lossiemouth?
Prices start from £350. We give a fixed price from your photos. Send a close-up and a photo of the whole item and your postcode.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
What happens once I’ve sent photos?
You’ll get a fixed quote back, plus dates. You’re under no obligation.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Do you come to Lossiemouth?
Yes. We cover the entire UK and come to Lossiemouth. Send pictures and we will quote, or call 0345 017 0787.
About our accreditations · Every repair comes with a one-year guarantee.
