Warwickshire · England
Bath Re-enamelling in Finwood
Local bath re-enamelling for Finwood: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- A bath that stays dull however much you clean it
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
How we handle bath re-enamelling in Finwood
Most baths are re-enamelled in a day, with the bath ready to use the following day. Taps, tiles, panels and plumbing all stay in place. We are frequently asked to fix worn patches where water runs and sits and a coloured bath you want in white, on cast iron baths, pressed steel baths and acrylic baths.
You get a one-year guarantee, the same in Finwood as everywhere else we work.
- Location
- Finwood (CV35)
- County
- Warwickshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we are called out for in Finwood
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Common reasons people in Finwood contact us include:
- Lots of chips and rust spots
- A roll-top that’s seen better days
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
Before you book anyone
- Aftercare advice
- What happens if the damage is worse than the photos show
- Who turns up on the day
- How soon you can use it again
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s typically ready the day after.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
Getting a price
To get a price, send two or three photos using our quote form or ring us. We’ll say right away whether it can be repaired.
Read more
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- The type of damage
- Whether we combine several jobs
- How much damage there is
- Any earlier repairs that need removing first
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
How to get a fixed price
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A clear, close picture of the problem area
- The material, if you know it
- A wider photo showing the entire bath
- Details of any past repairs
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Finwood and the surrounding area
Finwood is about 7 miles west of Warwick, in Warwickshire. Across the CV35 area, a technician comes to you. Finwood is one of 324 towns and villages in Warwickshire we cover. Our jobs stretch from Finwood to Birmingham (13 miles away).
Our repair technicians cover all of the CV35 postcode area and the streets around it. If you are just outside Finwood, we cover Lowsonford (1 mile south-west), High Cross (1 mile south-east), Bushwood (1 mile north-west), Rowington (1 mile north-east) and Rookery (1 mile south-west). Larger places within reach include Warwick (7 miles east), Royal Leamington Spa (8 miles east), Stratford-upon-Avon (8 miles south), Bedworth (15 miles north-east), Leamington Spa (8 miles east) and Kenilworth (7 miles east).
What’s near Finwood
Locally, our jobs take us to homes close to St Luke and Fleur De Lys Public House, among other places. Finwood’s nearest station is Lapworth station, roughly 1.9 miles north. Other landmarks nearby include St Michael's Hospital (5.6 miles east) and Baddesley Clinton (1.8 miles north). Open spaces near Finwood include Henley Sidings.
Why repair rather than replace?
Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why book with us
- Colours mixed by hand to suit your surface
- Fixed prices from your pictures
- We leave the room as we found it
- CHAS, Constructionline and SafeContractor accredited
See our full price list and bath cost comparison.
Looking after it afterwards
To keep it looking its best for years:
- Store bottles off the bath
- Do not use the bath until it has fully cured
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Nearby places to Finwood
Other services in Finwood
Finwood questions
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your pictures and we’ll quote them together.
Is it OK to have pets in the house?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Warwickshire.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
How much does bath re-enamelling cost in Finwood?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up and a photo of the whole item and your postcode.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
About our accreditations · Every repair comes with a one-year guarantee.
