Warwickshire · England
Bath Re-enamelling for Rookery homes
We travel to Rookery for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Worn patches where water runs and sits
Bath re-enamelling in Rookery without replacing anything
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you’re dealing with several chips and rust patches and worn patches where water runs and sits, we can help, on cast iron baths, Victorian roll-tops and acrylic baths alike.
Big or small, you get the same one-year guarantee.
- Location
- Rookery (B95)
- Area hub
- Warwickshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
Why repair rather than replace?
If the bath is sound, re-enamelling is typically much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
What you get with us
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Dust sheets down, tidy finish
- A fixed quote before you book
See our pricing or resurfacing vs replacement cost guide.
Rookery questions
Is there a guarantee?
All our work carries a one-year guarantee. We’ll explain what it covers when we quote.
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
How much does bath re-enamelling cost in Rookery?
Resurfacing from £350. Because every job differs, we price from pictures. You will get a fixed figure before you book.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Do you resurface freestanding baths?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Rookery and the surrounding area
Rookery is about 7 miles west of Warwick, in Warwickshire. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. Rookery is one of 324 places in Warwickshire where we work. Our nearest city page is Birmingham, about 14 miles away.
All of B95 is within our area, from the main roads to the quietest streets. Nearby, we also work in Lowsonford (1 mile north), High Cross (1 mile north-east), Finwood (1 mile north-east), Bushwood (1 mile north) and Buckley Green (2 miles west). Within a short drive, we also cover Warwick (7 miles east), Royal Leamington Spa (9 miles east), Stratford-upon-Avon (7 miles south), Leamington Spa (8 miles east), Kenilworth (7 miles north-east) and Fordbridge (13 miles north).
Near you in Rookery
Our customers here include homes close to Henley-in-Arden School, St Luke and Fleur De Lys Public House and the streets around them. The closest station to Rookery is Claverdon station, about 2.2 miles south-east of the centre. Further afield, we also cover the area around Morton Bagot Castle (4.6 miles west) and St Michael's Hospital (5.9 miles east). Green spaces nearby include Henley Sidings.
Landlord and trade work in Rookery
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Also near Rookery
More services for Rookery
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
Common problems we fix in Rookery
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, generally first under the taps and around the waste.
Common reasons people in Rookery contact us include:
- Chips and rust in more than one place
- A roll-top that’s seen better days
- Brown or grey marks that don’t clean off
- Enamel that’s lost its shine and feels rough
Comparing quotes
- How the room is protected while they work
- What prep work is covered
- How long it needs to cure
- How the colour is matched
Looking after it afterwards
How the surface is treated afterwards matters:
- Clean with a soft cloth and mild detergent
- Get any chip repaired quickly
- Don’t use the bath until it has fully cured
- A quick wipe after use keeps limescale away
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Do not try to scrub a worn bath back to shine. It removes more of the surface and makes resurfacing more work.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a full day. We tidy up before we leave and let you know when you can use it again.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Avoid using the area for a few hours before we arrive
- Clear the area around the damage
- Tell us if there are stairs or a lift
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Read more
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Rookery. The price reflects:
- Doing more than one item at once
- The material
- How much damage there is
- What kind of damage it is
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- A coin or ruler next to the damage for scale
- A wider photo showing the entire bath
- What it’s made of, if you know
- One sharp close-up of the damage
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
