Dorset · England
Bath re-enamelling & resurfacing in Fishpond Bottom, Dorset
Bath re-enamelling across Fishpond Bottom and nearby, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- An old resurfacing that’s failing
- A coloured bath you want in white
Fishpond Bottom and the surrounding area
Fishpond Bottom is about 7 miles south-east of Chard, in Dorset. Wherever you are in the DT6 postcode area, a technician comes to you. Fishpond Bottom is one of 462 places in Dorset where we work.
Our visits in DT6 are booked in the same way as anywhere else. Nearby, we also work in Marshwood (1 mile east), Wootton Fitzpaine (2 miles south), Pilsdon (3 miles east), Whitchurch Canonicorum (3 miles south-east) and Ryall (3 miles south-east). We also work in nearby towns such as Bridport (7 miles south-east), Lyme Regis (4 miles south-west), Beaminster (7 miles east), Allington (6 miles south-east), Charmouth (3 miles south) and Burton Bradstock (9 miles south-east).
Around Fishpond Bottom
Around Fishpond Bottom, we work in homes near Marshwood CofE Primary Academy and Fishpond Church (St John The Baptist), among other places. Fishpond Bottom’s nearest station is Axminster station, about 4.7 miles west of the centre. Nearby you’ll also find Axminster Hospital (4.3 miles west) and Charmouth Heritage Coast Centre (3.4 miles south). For a walk, there’s Lambert's Castle Hill.
Bath re-enamelling at your home in Fishpond Bottom
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for a bath in a colour that no longer suits and lots of chips and rust spots, in basins & shower trays, cast iron baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee.
- Where
- Fishpond Bottom (DT6)
- County
- Dorset
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
Once the work has cured, treat it gently:
- Wipe the bath dry after use in hard water areas
- Respect the curing time we give you
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Fishpond Bottom
- Straight answers about what a repair can do
- Repair technicians who travel to you, UK-wide
- Colour mixed on the day to match
- Same prices wherever you are
Take a look at our prices page and guide to resurfacing and replacement costs.
Landlords, agents and businesses in Fishpond Bottom
Housing associations and facilities teams use us for planned and reactive repairs in Dorset and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
When to call us in Fishpond Bottom
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
People typically call us when they notice something like this:
- Several chips and rust patches
- Wear marks under the taps
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Before booking anyone
- When it can be used again
- Whether the colour is mixed to match
- A fixed quote, and whether VAT is included
- How your room will be protected
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Fishpond Bottom questions
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
How much does bath re-enamelling cost in Fishpond Bottom?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
How long will the bath be out of use?
One day for most baths and can be used the day after. We will confirm timings when we quote.
Which areas do you work in?
The whole UK, including all of Dorset. Send your postcode with your photos and we will confirm dates.
Is it messy?
No. The work area is masked and covered, and we take our waste away with us.
Places near Fishpond Bottom
What else we do in Fishpond Bottom
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes the best part of a day. We clean up when we are done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the day after.
Before we arrive
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Ensure the room can be ventilated
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Read more
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The material and finish
- The colour and finish to match
- How easy the damage is to reach
- How many areas need work
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Details of any past repairs
- The postcode, so we can plan the visit
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
