Dorset · England
Bath Re-enamelling for Morcombelake homes
Bath re-enamelling for Morcombelake, without a refit. Get a fixed price from your pictures, then book a visit.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A bath that stays dull however much you clean it
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Wash away dyes and oils after use
- Repair dripping taps early
- Don’t leave bottles, razors or sponges standing on the surface
- Have chips seen to early
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our bath re-enamelling in Morcombelake
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Whether it’s thin, worn enamel in places and a dull, rough surface that won’t come clean, we can generally put it right.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Morcombelake (DT6)
- County
- Dorset
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Work for landlords and builders
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Places near Morcombelake
Also in Morcombelake
Do you need bath re-enamelling in Morcombelake?
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Keep an eye out for these signs:
- A coating lifting around the plughole
- Brown or grey marks that do not clean off
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
Comparing quotes
- Whether the price covers travel
- Whether a trained technician does the job
- Whether they match the colour on site
- Whether the price is fixed and includes VAT
What affects the price in Morcombelake
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Access to the area
- Whether we combine several jobs
Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Send pictures for a quote
You can take the photos on your phone. Just make sure we can see:
- Any details about the material
- A picture taken from further back
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed price, not a guess.
Repair or replace: which is better?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. The full price is agreed before you book, with nothing added on the day.
What you get with us
- Every repair guaranteed for a year
- Straight answers about what a repair can do
- Accredited with CHAS, Constructionline and SafeContractor
- We leave the room as we found it
Read our prices page and bath cost comparison.
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. Repairs will not solve:
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
- A bath that is rusted through
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
Your questions about bath re-enamelling in Morcombelake
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Will the new finish last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
What areas do you cover?
We cover the whole UK, including Morcombelake and the rest of Dorset. Just include your postcode and we’ll offer you dates.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Ensure the area is dry
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
How to get a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Advice
About Morcombelake
Morcombelake is about 4 miles west of Bridport, in Dorset. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 462 towns and villages in Dorset.
All of DT6 is within our area, from the main roads to the quietest streets. From Verriott's Lane, Loves Lane and Gibbs Lane or anywhere nearby, we can come to you. We also cover the places around Morcombelake: Whitchurch Canonicorum (1 mile north), Ryall (1 mile north-east), North Chideock (1 mile east), Chideock (2 miles south-east) and Seatown (2 miles south-east). Within a short drive, we also cover Bridport (4 miles east), Lyme Regis (4 miles west), Beaminster (6 miles north-east), Allington (4 miles east), Burton Bradstock (6 miles south-east) and Bradpole (5 miles east).
What’s near Morcombelake
In Morcombelake, that means homes near Church of St Gabriel. A little further out are Chideock and Seatown Museum (1.2 miles east) and Bridport Community Hospital (3.5 miles east). Open spaces near Morcombelake include Hardown Hill.
About our accreditations · Every repair comes with a one-year guarantee.
