Dorset · England

Bath re-enamelling & resurfacing in Wootton Fitzpaine, Dorset

Fixed-price bath re-enamelling in Wootton Fitzpaine and the surrounding area, typically in one visit and guaranteed for a year.

  • Resurfacing from £350
  • Brown or grey marks that don’t clean off
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Wootton Fitzpaine homes

About our bath re-enamelling in Wootton Fitzpaine

Resurfacing renews the entire surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. If you’re dealing with a coating lifting around the plughole and a coloured bath you want in white, we can help.

Every repair comes with our one-year guarantee, wherever you are in Dorset.

Technician in a mask working on a freestanding roll-top bath
Location
Wootton Fitzpaine (DT6)
County
Dorset
Guarantee
A year, on every repair
Price
From £350. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

What we do, step by step

Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a full day. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. We mask and protect the room and ventilate it.
  2. We clean and degrease the bath and repair any chips or rust.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. Once cured, normally by the following day, the bath is ready.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Make sure the area is dry
  • Open a window if you can

How to get a price

To get a price, send a couple of photos using our quote form or call us. We’ll tell you honestly whether it can be repaired.

Send pictures for a quote

Advice

Looking after it afterwards

Good habits make a big difference to how long a repair lasts:

  • Use washing-up liquid and a soft cloth
  • Leave the bath for the full curing time before using it
  • Keep toiletries on a shelf rather than in the bath
  • Avoid suction-cup mats

Dry the bath after use if possible, and rinse away any product left on the surface.

If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

Do you need bath re-enamelling in Wootton Fitzpaine?

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.

Clients generally contact us about:

  • A bath in a colour that no longer suits
  • Stains that won’t shift
  • An old resurfacing that is failing
  • Several chips and rust patches

Questions to ask before you book

  • Whether the price covers travel
  • What prep work is covered
  • Whether the colour is mixed to match
  • How soon you can use it again

How to compare quotes

Repair or replace: which is better?

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing normally wins. Prices start from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.

Why book with us

  • CHAS, Constructionline and SafeContractor accredited
  • No need to remove anything
  • One visit for most repairs
  • Fixed prices from your photos

See our pricing and bath cost comparison.

Honest limits

A repair is not always the answer, and we’ll tell you before we start. We cannot fix:

  • Steel that has corroded right through
  • Leaks from fittings rather than the bath
  • A bath split right through the body

Send us pictures and we will tell you honestly before booking.

What we work on

  • Victorian roll-tops
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths
  • Pressed steel baths

What bath re-enamelling costs

Resurfacing from £350. You will not pay by the hour. The price is based on:

  • What kind of damage it is
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out
  • The colour and finish to match

Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.

Quotes from your photos

You can usually get a fixed price without us visiting. To make it quick:

  • Your postcode, so we can check dates
  • Natural light rather than flash
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before

You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

Wootton Fitzpaine: your questions answered

Can you repair something that’s been repaired before?

Typically, yes. The old repair comes out first, so mention it when you send photos.

Does re-enamelling smell?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

Can you fix a peeling bath coating?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

How long does re-enamelling take?

Usually one day, with the bath ready the next day. Deeply pitted baths may need a second day.

Is it safe with children and pets around?

On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Do you charge for travel?

Travel is included in the price, with the same prices everywhere we work.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

About Wootton Fitzpaine

Wootton Fitzpaine is about 6 miles west of Bridport, in Dorset. From the centre of Wootton Fitzpaine to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Wootton Fitzpaine is one of 462 towns and villages in Dorset where we work.

Every address in DT6 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Wootton Lane and Westover Hill and the roads around them. Other places close to Wootton Fitzpaine include Fishpond Bottom (2 miles north), Whitchurch Canonicorum (2 miles east), Morcombelake (2 miles south-east), Marshwood (2 miles north-east) and Ryall (2 miles east). Further out, we also cover Bridport (6 miles east), Lyme Regis (3 miles south-west), Beaminster (8 miles north-east), Allington (6 miles east), Burton Bradstock (8 miles south-east) and Bradpole (7 miles east).

What’s near Wootton Fitzpaine

We visit homes around Wootton Fitzpaine Parish Church. A little further out are Axminster Hospital (4.8 miles west) and Charmouth Heritage Coast Centre (1.7 miles south). The countryside around Wootton Fitzpaine includes Stonebarrow Hill.

Map of Wootton Fitzpaine © OpenStreetMap contributors

Work for landlords and builders

We work for landlords, letting agents and housing providers in Wootton Fitzpaine as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

We are used to working with agents and managing companies. Send the address, photos and access details.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.