North Yorkshire · England

Bath re-enamelling & resurfacing in Foggathorpe, North Yorkshire

Bath re-enamelling for Foggathorpe, without a refit. Send us pictures for a fixed price, then book a visit.

  • Resurfacing from £350
  • A coloured bath you want in white
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Foggathorpe

Looking after it afterwards

How the surface is treated afterwards matters. Here’s what we suggest:

  • Do not leave bottles, razors or sponges standing on the surface
  • Use washing-up liquid and a soft cloth
  • Respect the curing time we give you
  • Have chips seen to early

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

Bath re-enamelling in Foggathorpe without replacing anything

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We are frequently asked to fix a coating lifting around the plughole and lots of chips and rust spots, across acrylic baths, basins & shower trays and pressed steel baths.

All of our repairs are guaranteed for twelve months in Foggathorpe and everywhere else. If something goes wrong with the work, we come back.

Technician in a mask working on a freestanding roll-top bath
Location
Foggathorpe (YO8)
Area hub
North Yorkshire
Guarantee
12 months on all our work
Quotes
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026

What bath re-enamelling costs

Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:

  • Any earlier repairs that need removing first
  • What kind of damage it is
  • How much damage there is
  • The material

The price reflects the work involved, not your postcode. The full price is agreed before you book, with no extras added later.

Send photos for a quote

When you take your pictures, these tips help us give you a firm price:

  • Whether it’s been repaired or coated before
  • Where you are, by postcode
  • A wider photo showing the entire bath
  • One sharp close-up of the damage

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you are under no obligation.

Repairing versus replacing in Foggathorpe

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Our prices are the same across the UK, so there’s no premium for Foggathorpe. The job itself decides the price: the material, the amount of damage and how many items.

Why choose Surface Doctor in Foggathorpe

  • No extra charge for your area
  • Nothing taken out or refitted
  • Fixed prices from your photos
  • Colour mixed on the day to match

Take a look at our pricing or bath cost comparison.

Honest limits

A few problems are outside what a surface repair can do:

  • A bath that is rusted through
  • A poorly supported acrylic bath, until it’s firmed up
  • A metal bath with a through crack

If in doubt, send pictures and we’ll say what we think before you book.

Materials we work on in Foggathorpe

  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

What happens on the day

Arrival times are agreed in advance. On site, it takes a full day for most jobs. The room is left tidy.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Open a window if you can
  • Let us know which floor the room is on

Ask for a price

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.

Send photos for a quote

Related advice

Do you need bath re-enamelling in Foggathorpe?

The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.

Send us a picture if you notice any of these:

  • Several chips and rust patches
  • Brown or grey marks that do not clean off
  • A dull, rough surface that will not come clean
  • A peeling or bubbling previous coating

Before you book anyone

  • When it can be used again
  • Whether there are any call-out or travel charges
  • How the colour is matched
  • Whether a trained technician does the job

10 questions to ask before you book

Foggathorpe questions

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room protected and ventilated.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just ensure the landlord agrees.

Can you quote from photos?

Generally, yes. Clear pictures let us give you a fixed price without visiting.

What happens if you find more damage?

The price is fixed for what the pictures show. Anything extra is discussed before we begin.

How long does re-enamelling last?

Care for it and it lasts. Gentle cleaning, no suction mats.

Are you a vetted contractor?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Can you repair something that is been repaired before?

Most of the time. Tell us what was done before and we will plan for it.

Our work in Foggathorpe

Foggathorpe is about 8 miles south-west of Pocklington, in North Yorkshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover 626 places in North Yorkshire. We work right across the region, from Foggathorpe to Leeds (28 miles away).

Every address in YO8 is within our area, from the main roads to the quietest streets. Other places close to Foggathorpe include Laytham (1 mile north), Willitoft (2 miles south-west), Water End (2 miles east), Spaldington (2 miles south) and Bubwith (3 miles west). We also work in nearby towns such as Selby (9 miles west), Barlby (8 miles west), Brayton (10 miles south-west), Thorpe Willoughby (12 miles west), Hambleton (13 miles west) and Cawood (11 miles west).

Local landmarks in Foggathorpe

The closest station to Foggathorpe is Howden station, about 4.3 miles south of the centre. Well-known places in the area include Duffield Castle (3.9 miles west).

Map of Foggathorpe © OpenStreetMap contributors

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.