North Yorkshire · England
Bath Re-enamelling for Brayton homes
Problem with your bath in Brayton? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Staining under the taps and around the waste
- Wear marks under the taps
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the entire job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why Brayton clients choose us
- Every repair guaranteed for a year
- No need to remove anything
- Most jobs done in one visit
- We come to you, anywhere in the UK
See our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Brayton without replacing anything
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Our technicians work on cast iron baths, acrylic baths and pressed steel baths, and people most often call us about a period or roll-top bath worth keeping and a dull, rough surface that won’t come clean.
You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we will sort it.
- Location
- Brayton (YO8)
- Area hub
- North Yorkshire
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. Most jobs take the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Have somewhere for us to park nearby if possible
- Tell us about parking, stairs or access
Getting a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Repairs by material
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Aftercare tips
Simple care helps the repair last. We recommend:
- Get any chip repaired quickly
- Do not leave bottles, razors or sponges standing on the surface
- Use washing-up liquid and a soft cloth
- Leave the bath for the full curing time before using it
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Brayton: your questions answered
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and we’ll quote them together.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
Can I get a quote without a visit?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Is a repair better than a new one?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Are there extra charges for Brayton?
There’s no separate call-out charge. The fixed price covers the visit and the work.
When we would advise against a repair
We’d rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Problems we cannot see until an old finish comes off
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Send us photos and we will tell you honestly before booking.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Landlords, agents and businesses in Brayton
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
What we are called out for in Brayton
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
You may need us if you’ve spotted:
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- Stains that won’t shift
- Thin, worn enamel in places
What your quote should include
- How to care for the finish
- What prep work is covered
- What protection goes down before work starts
- How long the guarantee is and what it covers
Covering Brayton
Brayton is about 1 mile south-west of Selby, in North Yorkshire. Across the YO8 area, we carry out the work at your property. Brayton is one of 626 places in North Yorkshire where we work. We work right across the region, from Brayton to Leeds (about 19 miles away).
All of YO8 is within our area. You will find streets such as Peregrine Square, Doncaster Road and Beechcroft. Neighbouring places we cover include Selby (1 mile north-east), Barlow (3 miles south-east), Osgodby (3 miles north-east), Temple Hirst (3 miles south) and Lund (4 miles north-east). Further out, we also cover Tadcaster (11 miles north-west), Barlby (3 miles north-east), Hambleton (3 miles west), Cawood (5 miles north), Church Fenton (6 miles north-west) and Hemingbrough (5 miles east).
Near you in Brayton
Around Brayton, we work in homes near St Mary's Catholic Primary School, Church of St Wilfred and Brayton High School and the streets around them. The closest station to Brayton is Selby station, about 1.6 miles north-east.
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Towns and villages near Brayton
Also in Brayton
About our accreditations · Every repair comes with a one-year guarantee.
