North Yorkshire · England
Bath re-enamelling & resurfacing in Hambleton, North Yorkshire
Damaged bath in Hambleton? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
Work for landlords and builders
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Bath re-enamelling in Hambleton without replacing anything
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s a coloured bath you want in white and brown or grey marks that don’t clean off, we can help.
All of our repairs are guaranteed for twelve months in Hambleton and everywhere else. We return to put right any problem with the work.
- Area
- Hambleton (YO8)
- County
- North Yorkshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
A repair isn’t right for every job, for example:
- Steel that has corroded right through
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we’ll give you a straight answer.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Our work in Hambleton
Hambleton is about 4 miles west of Selby, in North Yorkshire. We agree a date that works for you, and you will know when to expect us, so you are not left waiting in all day. We work in 626 places across North Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 16 miles away.
We work across the YO8 postcode area. Whether you live on Station Road, Main Road and Back Lane or a nearby road, a technician can come to you. Close by, we cover Gateforth Park (1 mile east), Gateforth (1 mile south-east), Thorpe Willoughby (2 miles east), West Haddlesey (3 miles south) and Birkin (3 miles south-west). Further out, we also cover Selby (4 miles east), Tadcaster (9 miles north-west), Barlby (5 miles east), Brayton (3 miles east), Cawood (4 miles north) and Church Fenton (4 miles north-west).
Around Hambleton
In Hambleton, that means homes near St Mary's Church, among other places. Hambleton’s nearest station is Sherburn-In-Elmet station, roughly 3.4 miles north-west of the centre.
Repair or replace in Hambleton?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Same prices wherever you are
- CHAS and Constructionline accredited
- Fixed prices from your pictures
- No need to remove anything
Take a look at our full price list or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- How many areas need work
- The material and finish
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
We charge the same wherever you are, with no extra for Hambleton. The job itself decides the price: how much damage, what it’s made of and how many items.
Send photos for a quote
A couple of clear pictures is all it takes. It helps if you send:
- A close-up of the damage, in focus
- The material, if you know it
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Signs you need bath re-enamelling in Hambleton
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
You may need us if you’ve spotted any of these:
- A bath that stays dull however much you clean it
- Staining under the taps and around the waste
- Wear marks under the taps
- An original cast iron bath that needs restoring
What your quote should include
- What prep work is covered
- Whether the price covers travel
- When it can be used again
- How the room is protected while they work
Nearby places to Hambleton
Other services in Hambleton
Hambleton: your questions answered
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
What if the damage is worse than the pictures show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Is a repair better than a new one?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we will tell you.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Keeping it looking good
So the finish stays in good condition for years:
- Avoid suction-cup mats
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs immediately
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
What happens on the day
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. The floor and nearby surfaces are covered before we open a single tin. Most visits take a full day, and the room is left clean and tidy.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Let us know which floor the room is on
- Mention any parking restrictions or tricky access
- Mention any earlier repairs or resurfacing
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
