Wiltshire · England
Bath Re-enamelling in Thickwood
Bath re-enamelling in Thickwood without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- A peeling or bubbling previous coating
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair will not do:
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
How we handle bath re-enamelling in Thickwood
Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. Common call-outs are for a period or roll-top bath worth keeping and brown or grey marks that don’t clean off, across pressed steel baths, acrylic baths and Victorian roll-tops.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Thickwood (SN14)
- County
- Wiltshire
- Cover
- One year on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Do you need bath re-enamelling in Thickwood?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
If you can see any of these, send us a photo:
- Chips and rust in more than one place
- Enamel that’s lost its shine and feels rough
- A roll-top that is seen better days
- Stains that will not shift
Questions to ask before booking
- What prep work is covered
- A fixed price, and whether VAT is included
- Whether the price covers travel
- Aftercare advice
For landlords and businesses
If you manage property in Thickwood, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
What happens on the day
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow the best part of a day from start to finish. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say straight away if a repair is the right fix.
Related advice
Repairing versus replacing in Thickwood
Replacing a bath generally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
What you get with us
- Everything repaired in place
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
- Colour-matched on site
See our pricing and guide to resurfacing and replacement costs.
Thickwood and the surrounding area
Thickwood is about 6 miles west of Chippenham, in Wiltshire. Our technicians come to homes and businesses in Thickwood and nearby villages, so there is no workshop to go to. We work in all 425 towns and villages across Wiltshire, from the larger towns to small villages. You can also see our page for Birmingham, about 72 miles away.
Our visits in SN14 work the same way as everywhere else we cover. That includes homes on Fairview, Valley Way and Hillcrest. We also cover the places around Thickwood: Colerne (1 mile south), The Shoe (1 mile north-west), Slaughterford (1 mile north-east), Upper Wraxall (2 miles north-west) and Ford (2 miles north-east). We also work in nearby towns such as Trowbridge (9 miles south), Chippenham (6 miles east), Calne (11 miles east), Devizes (14 miles south-east), Westbury (14 miles south) and Melksham (8 miles south-east).
Near you in Thickwood
Locally, our jobs take us to homes close to Church of St John the Baptist and Colerne C of E Primary School, among other places. Nearby you’ll also find Castle Combe Museum (3 miles north) and Chippenham Community Hospital (5.5 miles east). Not far away are Vincients Wood.
Towns and villages near Thickwood
Other services in Thickwood
Thickwood questions
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Can you repair several things at once?
Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.
Do you cover the whole of Wiltshire?
Across the UK. Our prices are the same everywhere.
Will the price change on the day?
We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- Stick to gentle, non-abrasive cleaners
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
DIY kit or professional repair?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
What your bath is made of matters
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
About our accreditations · Every repair comes with a one-year guarantee.
