Greater London · England

Bath Re-enamelling in Forest Gate

Full bath re-enamelling and resurfacing for homes and businesses in Forest Gate and across Greater London. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • A coating lifting around the plughole
  • Enamel that is lost its shine and feels rough
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Forest Gate

Common questions in Forest Gate

Someone resurfaced my bath and it’s peeling. Can you help?

In most cases. We strip the failing coating and resurface it properly. Mention it when you send pictures.

How much does bath re-enamelling cost in Forest Gate?

Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can tenants book a repair?

Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Can you do more than one item on the same visit?

Of course, and it usually saves money. Just add the extra items to your photos and we will quote them together.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Do you need to take the bath out?

Not at all. Everything is done in your bathroom, with the room protected and ventilated.

About our bath re-enamelling in Forest Gate

Re-enamelling is a one-day job for most baths, and you can use the bath the following day. Nothing is disconnected or removed. We work on pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are an original cast iron bath that needs restoring and brown or grey marks that don’t clean off.

All our work is covered by a one-year guarantee, wherever you are in Greater London.

Technician in a mask working on a freestanding roll-top bath
Area
Forest Gate (E7, E15, E11)
County
Greater London
Guarantee
One year on every repair
Price
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

Honest limits

We will not take on work that will not last, so these are the limits:

  • Holes rusted through the metal
  • Leaking taps or wastes (a plumber’s job)
  • A metal bath with a through crack

Send us photos and we will tell you honestly.

What we work on

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays

Should you replace it?

A new bath means a plumber, removing a heavy bath, making good the walls and tiles and several days without a working bathroom. Resurfacing renews the entire surface with the bath left where it is. Prices start from £350. Compared with replacing, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

What you get with us

  • Most jobs done in one visit
  • Colour-matched on site
  • Free fixed quotes from pictures
  • We will tell you if it’s not worth repairing

See our prices page and resurfacing vs replacement cost guide.

What your bath is made of matters

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.

What we are called out for in Forest Gate

By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

Look out for these signs:

  • Worn patches where water runs and sits
  • A coloured bath you want in white
  • Chips and rust in more than one place
  • Brown or grey marks that do not clean off

Before you book anyone

  • Is the price fixed, and does it include VAT?
  • What preparation is included
  • How soon you can use it again
  • What the guarantee covers, and for how long

How to compare quotes

How we price bath re-enamelling

Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:

  • Whether old repairs or coatings need taking off
  • The type of damage
  • The material and finish
  • Unusual colours or finishes

No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed price

Almost every job we do is priced from pictures. This is what to send:

  • Good light, ideally daylight, without flash glare
  • A close-up of the damage, in focus
  • What it’s made of, if you know
  • Details of any past repairs

Most clients in Forest Gate get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Aftercare tips

Looking after the surface is easy:

  • Get any chip repaired quickly
  • Dry the bath after use to stop limescale
  • Clean with a soft cloth and mild detergent
  • Do not let dyes or oils sit on the finish

Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.

Our work in Forest Gate

Forest Gate is about 6 miles north-east of London, in Greater London. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Forest Gate is one of 764 towns and villages in Greater London where we work. Our jobs stretch from Forest Gate to London (about 6 miles away).

We work across E7, E15 and E11 and the streets around it. From Elm Road, Ash Road and Cary Road or a nearby road, we can come to you. You will find Forest Gate on the A114 and A116, which makes it straightforward to reach. Close by, we cover Upton (1 mile south), Aldersbrook (1 mile north), Holloway Down (1 mile west), Plashet (1 mile south-east) and Little Ilford (1 mile east). Further out, we also cover London (6 miles south-west), City of Westminster (8 miles west), Marylebone (8 miles west), Kensington (10 miles west), St Pancras (6 miles west) and Shoreditch (5 miles west).

Landmarks near Forest Gate

Locally, our jobs take us to homes close to West Ham Park, Forest Gate Community School and Woodgrange Infant School and the streets around them. You’ll also find Tyndale Academy (0.6 miles south-east), The Hudson Bay pub (less than half a mile south) and A Radical Church (less than half a mile south-east). Forest Gate has its own railway station: Wanstead Park station. Nearby you will also find Cann Hall (0.8 miles north-west) and Passmore Edwards Museum (0.9 miles south-west). Open spaces near Forest Gate include Hollow Pond and Old Ford Island.

Map of Forest Gate © OpenStreetMap contributors

The process

When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a full day. We clean up when we’re done and let you know when you can use it again.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. We spray on the new enamel finish in several coats.
  5. The bath is left to cure and can typically be used the following day.

Before we arrive

  • Let us know about parking or access
  • Mention if the room is upstairs or in a flat
  • Avoid using the area for a few hours before we arrive

Get a quote

To get a price, send a couple of pictures through our quote form or call us. We will say straight away whether it can be repaired.

Send pictures for a quote

Read more

DIY repairs versus a professional job

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send pictures.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.