Derbyshire · England
Bath Re-enamelling for Furness Vale homes
Problem with your bath in Furness Vale? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A peeling or bubbling previous coating
Furness Vale: your questions answered
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Is there a smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can you repair several things at once?
Of course, and it generally saves money. Just add the extra items to your photos and we will quote them together.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Bath re-enamelling in Furness Vale, done in place
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for several chips and rust patches and stains that won’t shift, on basins & shower trays, cast iron baths and acrylic baths.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Where
- Furness Vale (SK23)
- Area hub
- Derbyshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
Places near Furness Vale
Also in Furness Vale
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Straight answers about what a repair can do
- We leave the room as we found it
- Colour-matched on site
- Every repair guaranteed for a year
Take a look at our pricing and guide to resurfacing and replacement costs.
What happens on the day
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes a full day, and we finish by cleaning up and talking you through the result.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Landlord and trade work in Furness Vale
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Housing associations and facilities teams use us for planned and reactive repairs in Derbyshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Keeping it looking good
Aftercare is simple:
- Have chips seen to early
- A dripping tap should be fixed promptly
- Keep suction mats out of the bath
- Store bottles off the bath
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What bath re-enamelling costs
Resurfacing from £350. There’s no charge for travel to Furness Vale. The price comes down to:
- Unusual colours or finishes
- Whether we combine several jobs
- The material
- Any earlier repairs that need removing first
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
How to get a fixed price
Most quotes are done from photos alone. To help us price it:
- Details of any past repairs
- Natural light rather than flash
- Something in shot to show the size
- A photo taken from further back
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.
Furness Vale and nearby
Furness Vale is about 5 miles south-east of Marple, in Derbyshire. Jobs in Furness Vale are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Our technicians cover all 532 towns and villages across Derbyshire, from the larger towns to small villages. Our jobs stretch from Furness Vale to Manchester (about 13 miles away).
Our repair technicians cover all of the SK23 postcode area. Jobs here include addresses on Station Road, Charlesworth Road and Yeardsley Avenue and the roads around them. Close by, we cover Gowhole (1 mile north-east), Bridgemont (1 mile south-east), Hockerley (1 mile south), Buxworth (1 mile south-east) and Whaley Bridge (1 mile south). Within a short drive, we also cover Buxton (7 miles south-east), Glossop (7 miles north), Hadfield (8 miles north), Chapel-en-le-Frith (4 miles south-east), Brosscroft (8 miles north) and Gamesley (7 miles north).
What’s near Furness Vale
Our customers here include homes close to Furness Vale Primary School, Saint John The Divine Church and New Mills School. There’s a railway station in Furness Vale itself: Furness Vale station. Well-known places in the area include Yeardsley cum Whaley Urban District (0.7 miles south-west). For a walk, there is Chinley Churn.
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
When we would advise against a repair
To be straight with you, some problems need a different fix:
- A cast iron or steel bath that is cracked right through
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
