Dorset · England
Bath Re-enamelling in Furzebrook
Bath re-enamelling across Furzebrook and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Furzebrook and nearby
Furzebrook is about 8 miles south-west of Poole, in Dorset. Customers in Furzebrook get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. We cover 462 places across Dorset.
Postcode districts we cover here: BH20. Nearby, we also work in Norden (1 mile east), Church Knowle (2 miles south-east), Ridge (2 miles north), Corfe Castle (2 miles south-east) and Kingston (3 miles south-east). Further out, we also cover Wimborne Minster (12 miles north-east), Blandford Forum (14 miles north), Ferndown (14 miles north-east), Broadstone (9 miles north-east), Corfe Mullen (9 miles north-east) and Swanage (7 miles south-east).
What’s near Furzebrook
We visit homes around The Halfway Inn, The Purbeck School and Stonehill Down Nature Reserve, among other places. The closest station to Furzebrook is Wareham station, about 2.7 miles north. A little further out are Corfe Castle Museum (2.2 miles south-east) and Arne (1.6 miles north). Not far away are Blue Pool and Arne RSPB reserve.
How we handle bath re-enamelling in Furzebrook
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. It avoids removal, plumbing and re-tiling. We work on acrylic baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are an old resurfacing that’s failing and lots of chips and rust spots.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Where
- Furzebrook (BH20)
- County
- Dorset
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Can I fix it myself?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Keeping it looking good
So the finish stays in good condition:
- Never use suction bath mats
- Fix dripping taps quickly
- Rinse off hair dye, oils and bath bombs immediately
- Get any chip repaired quickly
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- How much damage there is
- The colour and finish to match
- The material and finish
- Doing more than one item at once
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To help us price it:
- Natural light rather than flash
- The postcode, so we can plan the visit
- The material, if you know it
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
When a repair isn’t the answer
In fairness, there are a few things a repair won’t fix:
- A cast iron or steel bath that’s cracked right through
- Leaks from fittings rather than the bath
- A bath that’s rusted through
Send us photos and we will tell you honestly.
What we work on
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Furzebrook: your questions answered
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is there any odour?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Is the work guaranteed?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
How quickly can you book me in?
Your quote comes with available dates. Tell us if you need it done quickly.
What we do, step by step
We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a full day in most cases. The room is left tidy.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
Get a quote
Email us a picture of the damage and one of the whole item, and tell us you are in Furzebrook, and we will come back with a fixed quote.
Read more
Places near Furzebrook
What else we do in Furzebrook
What your bath is made of matters
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, and the bath can be used the day after. Prices start from £350. The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.
What you get with us
- Honest advice, even when it means no job
- Colours mixed by hand to suit your surface
- Every repair guaranteed for a year
- One visit for most repairs
Read our pricing or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
