Dorset · England
Bath Re-enamelling for Furzehill homes
Our repair technicians come to Furzehill for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- An old resurfacing that’s failing
Your questions about bath re-enamelling in Furzehill
Is a repair better than a new one?
Normally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
How do I get a price for bath re-enamelling in Furzehill?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up and a photo of the entire item and your postcode.
Is there any odour?
It depends on the job, but often a little. Open windows and an extractor fan help.
Can you do the outside of a roll-top?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Does the bath have to be removed?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Can tenants book a repair?
Yes. Check with your landlord; we can send the quote to them too.
Bath re-enamelling at your home in Furzehill
We re-enamel plenty of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Whether it’s a bath that stays dull however much you clean it and chips and rust in more than one place, we can help.
A one-year guarantee comes as standard.
- Area
- Furzehill (BH21)
- County
- Dorset
- Cover
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
To keep it looking its best for years:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs straight away
- A dripping tap should be fixed promptly
- Never use suction bath mats
Dry the bath after use if possible, and rinse away any product left on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Honest limits
A few problems are outside what a surface repair can do:
- A bath split right through the body
- Leaks from fittings rather than the bath
- Holes rusted through the metal
Send us photos and we’ll tell you honestly before you book.
Materials we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Furzehill and the surrounding area
Furzehill is about 1 mile north of Wimborne Minster, in Dorset. From the centre of Furzehill to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. We cover all 462 towns and villages in Dorset.
Jobs in BH21 work the same way as everywhere else we cover. From Crofton, Furzehill and Smugglers' Lane or anywhere nearby, we can come to you. We also cover the places around Furzehill: Clapgate (1 mile north), Grange (1 mile north-east), Pig Oak (1 mile north-east), Wimborne Minster (1 mile south) and Stone (1 mile south-west). We also work in nearby towns such as Christchurch (11 miles south-east), Blandford Forum (8 miles west), Verwood (6 miles north-east), Ferndown (4 miles east), Broadstone (4 miles south) and Corfe Mullen (4 miles south-west).
Local landmarks in Furzehill
Locally, our jobs take us to homes close to Queen Elizabeth's School, Wimborne First School and Dumpton School. Other landmarks nearby include Stapehill Abbey (2.6 miles east) and Alderney Hospital (5 miles south). Open spaces near Furzehill include Stoney Down.
Towns and villages near Furzehill
More services for Furzehill
What bath re-enamelling costs
Prices start from £350. You won’t pay by the hour. The price depends on:
- The material and finish
- How many areas need work
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Send photos for a quote
Almost every job we do is priced from pictures. This is what to send:
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- Any details about the material
There is no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Do you need bath re-enamelling in Furzehill?
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is typically as strong as ever.
If you can see any of these, send us a picture:
- Thin, worn enamel in places
- An old resurfacing that’s failing
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
What to look for in a quote
- Who turns up on the day
- Whether cleaning and preparation are in the price
- A fixed price, and whether VAT is included
- How long it needs to cure
What happens on the day
You do not need to empty the room. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. Most jobs take a full day, and you’re welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Have a window or extractor fan available
- Point us to the nearest place to park
- Ensure the area is dry
Ask for a price
Most clients in Furzehill get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Repair or replace in Furzehill?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, with the bath ready the day after. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
What you get with us
- We’ll tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
Take a look at our prices page and bath cost comparison.
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
About our accreditations · Every repair comes with a one-year guarantee.
