Dorset · England
Bath re-enamelling & resurfacing in Stone, Dorset
Bath re-enamelling across Stone and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- Stains that will not shift
- Worn patches where water runs and sits
Bath re-enamelling at your home in Stone
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a bath in a colour that no longer suits and an original cast iron bath that needs restoring, in acrylic baths, pressed steel baths and cast iron baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Stone (BH21)
- Region
- Dorset
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Landlords, agents and businesses in Stone
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Landlords, letting agents and housing providers in Stone use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Also in Stone
About Stone
Stone is about 1 mile west of Wimborne Minster, in Dorset. From the centre of Stone to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Stone is one of 462 places in Dorset we cover.
Here we cover the BH21 postcode area. Local streets include Stone Lane, St Margaret's Hill and The Broads. If you’re just outside Stone, we cover Wimborne Minster (1 mile east), Furzehill (1 mile north-east), Clapgate (1 mile north-east), Colehill (1 mile east) and Grange (1 mile north-east). Larger places within reach include Christchurch (12 miles east), Blandford Forum (8 miles north-west), Verwood (7 miles north-east), Ferndown (4 miles east), Broadstone (3 miles south) and Corfe Mullen (3 miles south).
Local landmarks in Stone
We visit homes around Dumpton School, Wimborne First School and Wimborne United Reform Church. Nearby too are The Green Man Inn (0.5 miles south-east) and Queen Elizabeth's School (within half a mile west). Nearby you will also find Alderney Hospital (4.6 miles south-east) and Stapehill Abbey (3.2 miles east). For a walk, there is Stoney Down.
FAQs for Stone
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Do you work in Stone?
Yes. We work across the UK and come to Stone. Send photos and we will quote, or call 0345 017 0787.
How do I get a price for bath re-enamelling in Stone?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Can I get a quote without a visit?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before and we will plan for it.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
What happens on the day
The work is clean and fairly quiet. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Open a window if you can
- Tell us if there are stairs or a lift
Get a quote
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say immediately whether it can be repaired.
Related advice
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and give it the full curing time. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Repairing versus replacing in Stone
If the bath is sound, re-enamelling is normally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s also far quicker. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking, with no extras added later.
What you get with us
- We leave the room as we found it
- Honest advice, even when it means no job
- Most jobs done in one visit
- A fixed quote before booking
Take a look at our pricing or resurfacing vs replacement cost guide.
What we cannot put right
Before you book, it’s worth knowing the limits:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
- Holes rusted through the metal
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
Do you need bath re-enamelling in Stone?
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a photo if you notice any of these:
- An outdated colour you’d like to change
- A peeling or bubbling previous coating
- Chips and rust in more than one place
- Brown or grey marks that do not clean off
What to look for in a quote
- How soon you can use it again
- Whether the colour is mixed to match
- What protection goes down before work starts
- Is the price fixed, and does it include VAT?
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Clean with a soft cloth and mild detergent
- Don’t leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs right away
- Repair dripping taps early
Wipe the bath dry after use where you can, particularly with hard water, and rinse away any product left on the surface.
Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
