Liverpool · England
Bath re-enamelling & resurfacing in Garston, Liverpool
Fixed-price bath re-enamelling in Garston and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that don’t clean off
Bath re-enamelling at your home in Garston
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. If you are dealing with a bath that stays dull however much you clean it and worn patches where water runs and sits, we can help.
All of our repairs are guaranteed for twelve months in Garston and everywhere else. If something goes wrong with the work, we come back.
- Location
- Garston (L19, L24, L70)
- Region
- Liverpool
- Guarantee
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
What else we do in Garston
Signs you need bath re-enamelling in Garston
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
Most people contact us after spotting one of these:
- A roll-top that’s seen better days
- Wear marks under the taps
- Staining under the taps and around the waste
- A coating lifting around the plughole
Before you book anyone
- What happens if the damage is worse than the pictures show
- What prep work is covered
- If travel is included in the price
- Aftercare advice
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Common questions in Garston
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can a failed resurfacing be redone?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How do I get a price for bath re-enamelling in Garston?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.
What happens after I send pictures?
We come back with a fixed price, typically with dates to choose from. You’re under no obligation.
How it works
On the day itself, there is little for you to do. Show us the job, point us to the room, and we’ll take it from there. The job generally runs to the best part of a day.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Before we arrive
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Getting a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Related advice
What we can’t put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
- A bath split right through the body
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Repair or replace: which is better?
A replacement frequently means several trades over several days. Resurfacing takes one technician and generally a day, with the bath back in use the next day. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Garston. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why Garston clients choose us
- No extra charge for your area
- We leave the room as we found it
- Honest advice, even when it means no job
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and guide to resurfacing and replacement costs.
What affects the price in Garston
Prices start from £350. You won’t pay by the hour. The price depends on:
- The size and number of damaged areas
- How many items we do on one visit
- Any earlier repairs that need removing first
- The type of damage
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
When you take your photos, a few simple things make all the difference:
- A picture taken from further back
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
- What it’s made of, if you know
To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Where we work around Garston
Garston is about 4 miles south of Liverpool, in Liverpool. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Garston is one of 52 places in Liverpool we cover.
Our technicians cover all of L19, L24 and L70 and the streets around it. That includes homes on Dock Road, Vesta Road and Speke Road. Other places close to Garston include Allerton (1 mile north), Hunt's Cross (2 miles east), Woolton (2 miles north-east), Speke (2 miles east) and Halewood (2 miles east). Further out, we also cover Liverpool (4 miles north), Crosby (11 miles north-west), Everton (6 miles north-west), Orrell (9 miles north-west), Brighton-le-Sands (11 miles north-west) and Wavertree (4 miles north-west).
Near you in Garston
Locally, our jobs take us to homes close to St Benedict's College, Clarkes Gardens and The Academy of St Nicholas. Nearby too are Banks Road Primary School (less than half a mile south), The Alexandra pub (under half a mile north) and St Michael's Church (within half a mile north-west). Garston’s nearest station is Liverpool South Parkway station, about 0.5 miles north of the centre. Well-known places in the area include Liverpool Heart and Chest Hospital (4.1 miles north) and Allerton and Hunts Cross (0.9 miles north-east). The countryside around Garston includes Speke and Garston Coastal Reserve and Princes Park lake.
About our accreditations · Every repair comes with a one-year guarantee.
