Stirling · Scotland

Bath Re-enamelling for Gartmore homes

We travel to Gartmore for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Gartmore

What we cannot put right

Before you book, it’s worth knowing the limits too:

  • A cast iron or steel bath that’s cracked right through
  • Leaks from fittings rather than the bath
  • Problems we can’t see until an old finish comes off

Not sure? Send photos and we will give you a straight answer before you book.

Materials we work on in Gartmore

  • Victorian roll-tops
  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Cast iron baths

Bath re-enamelling at your home in Gartmore

If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for a bath that stays dull however much you clean it and a roll-top that’s seen better days, in cast iron baths, acrylic baths and basins & shower trays.

All our work is covered by our one-year guarantee.

Roll-top bath being refinished by a Surface Doctor technician
Where
Gartmore (FK8)
County
Stirling
Cover
One year on every repair
Quotes
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026

Landlords, agents and businesses in Gartmore

Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

We carry out planned and one-off repairs for housing associations and facilities teams in Stirling and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

FAQs for Gartmore

What happens next?

We review the photos and send a fixed quote with dates.

Is there a smell?

There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Just add the extra items to your pictures and you will get one combined price.

Will it make a mess?

No. The work area is masked and covered, and we leave the room clean.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Is repairing better than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

How do I get a price for bath re-enamelling in Gartmore?

Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up and a photo of the entire item with your FK8 postcode.

How soon can you come?

It depends on the time of year and where you are. We will offer you dates when we send your quote.

How we price bath re-enamelling

Prices start from £350. You will not pay by the hour. The price is based on:

  • The type of damage
  • Whether we combine several jobs
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your photos

We price nearly every job from photos. This is what to send:

  • A coin beside the damage so we can judge size
  • Details of any past repairs
  • A wider photo showing the entire bath
  • Any details about the material

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.

The process

Your technician turns up at the time we agreed with you, introduces themselves and checks the damage against your photos first. The floor and nearby surfaces are covered before we open a single tin. Most visits take the best part of a day, and we leave the room as we found it.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Before we arrive

  • Have a window or extractor fan available
  • Mention if the room is upstairs or in a flat
  • Keep pets and children out of the room while we work

How to get a price

Most clients in Gartmore get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Related advice

Common problems we fix in Gartmore

A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.

Typical reasons for a call-out include:

  • Wear marks under the taps
  • A coloured bath you want in white
  • A dull, rough surface that won’t come clean
  • A roll-top that is seen better days

Comparing quotes

  • Whether the price is fixed and includes VAT
  • Whether they match the colour on site
  • What the guarantee covers, and for how long
  • How long it needs to cure

10 questions to ask before booking

How to care for the repair

So the finish stays in good condition:

  • Avoid suction-cup mats
  • Rinse off hair dye, oils and bath bombs immediately
  • Clean with a soft cloth and mild detergent
  • Keep toiletries on a shelf rather than in the bath

The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.

On a worn bath, rust spots keep spreading. It’s simpler to resurface before they spread.

Repair or replace: which is better?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why Gartmore clients choose us

  • Dust sheets down, tidy finish
  • One visit for most repairs
  • Fixed prices from your photos
  • Everything repaired in place

Read our full price list or bath cost comparison.

Our work in Gartmore

Gartmore is about 15 miles north-east of Dumbarton, in Stirling. Across the FK8 area, we carry out the work at your property. We cover 55 places across Stirling. Our nearest city page is Glasgow, about 20 miles away.

Here we cover the FK8 postcode area. That includes homes on Main Street, Park Avenue and Jellicoe Avenue. We also travel to Aberfoyle (2 miles north), Buchlyvie (4 miles south-east), Kinlochard (5 miles north-west), Balfron (5 miles south) and Arnprior (6 miles east). Larger places within reach include Callander (9 miles north-east), Killearn (7 miles south), Strathblane (11 miles south), Doune (13 miles east), Kippen (8 miles east) and Drymen (6 miles south-west).

Local landmarks in Gartmore

Locally, our jobs take us to homes close to Gartmore Parish Church. Further afield, we also cover the area around Duchray Castle (3 miles north-west). Open spaces near Gartmore include Lake of Menteith and Craigmore.

Map of Gartmore © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.