Lincolnshire · England
Bath Re-enamelling in Gedney Dyke
Full bath re-enamelling and resurfacing at your home in Gedney Dyke, with a one-year guarantee on every repair.
- Resurfacing from £350
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Your questions about bath re-enamelling in Gedney Dyke
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Do you work in Gedney Dyke?
Yes. We cover the entire UK and travel to Gedney Dyke and the rest of Lincolnshire. Send photos and we’ll quote, or call 0345 017 0787.
Can landlords book you?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
Do you cover the whole of Lincolnshire?
The entire UK, including all of Lincolnshire. Send your postcode with your pictures and we will offer you dates.
Can I get a quote without a visit?
Usually, yes. Clear pictures let us give you a fixed price without visiting.
Is it OK to have pets in the house?
Just keep them out of the work area. We will let you know when it’s safe to use again.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.
What happens if you find more damage?
If we find something the pictures didn’t show, we explain it first. The price only changes if you agree.
Bath re-enamelling at your home in Gedney Dyke
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for wear marks under the taps and several chips and rust patches, in pressed steel baths, basins & shower trays and cast iron baths.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Location
- Gedney Dyke (PE12)
- Region
- Lincolnshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What happens on the day
You don’t need to empty the room beforehand. We bring everything we need with us, put protection down and start once you are happy with the plan. Most jobs take the best part of a day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the day after.
Before we arrive
- Ensure the room can be ventilated
- Ensure the area is dry
- Keep pets and children out of the room while we work
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
Also near Gedney Dyke
More services for Gedney Dyke
What a repair cannot fix
A few problems are outside what a surface repair can do:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Our work in Gedney Dyke
Gedney Dyke is about 10 miles north of Wisbech, in Lincolnshire. Whether you’re in the middle of Gedney Dyke or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 732 towns and villages across Lincolnshire, from the larger towns to small villages.
Jobs in PE12 are booked in the same way as anywhere else. Local streets include Main Street, Engine Dyke and Roman Bank. You will find Gedney Dyke on the B1359, which makes it straightforward to reach. Nearby, we also work in Holbeach Hurn (2 miles north-west), Fleet Hargate (2 miles west), Holbeach (4 miles west), Holbeach Bank (4 miles west) and Holbeach St Matthew (4 miles north). Larger places within reach include Boston (12 miles north-west), Spalding (11 miles west), Pinchbeck (11 miles west), Witham (13 miles north-west), Crowland (15 miles south-west) and Staniland (12 miles north-west).
Landmarks near Gedney Dyke
In Gedney Dyke, that means homes near Church of St Nicholas, Lutton St Nicholas Primary School and University Academy Long Sutton. Well-known places in the area include Fleet Motte (2.5 miles south-west).
Landlords, agents and businesses in Gedney Dyke
Housing associations and facilities teams use us for planned and reactive repairs in Lincolnshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How to look after the repair
Once the work has cured, treat it gently:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Common problems we fix in Gedney Dyke
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
The most common problems we are called about are:
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- An outdated colour you’d like to change
- Several chips and rust patches
What to look for in a quote
- Who will actually do the work
- What preparation is included
- What happens if they find more damage
- Aftercare advice
Prices and what affects them
Resurfacing from £350. We give every job a fixed quote from pictures. These are the things that affect it:
- Whether we combine several jobs
- What the surface is made of
- How easy the damage is to reach
- Whether old repairs or coatings need taking off
Instead of hourly rates, we price the entire job up front. Damage, material and access decide it.
Send photos for a quote
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- A wider photo showing the whole bath
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- Your postcode, so we can check dates
To get a price, send a couple of photos using our quote form or ring us. We will tell you honestly if a repair is the right fix.
About our accreditations · Every repair comes with a one-year guarantee.
