Lincolnshire · England
Bath Re-enamelling in Holbeach Hurn
Fixed-price bath re-enamelling in Holbeach Hurn and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Staining under the taps and around the waste
- Several chips and rust patches
What affects the price in Holbeach Hurn
Prices start from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- How many areas need work
- What the surface is made of
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from photos
We price nearly every job from pictures. This is what to send:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- One picture of the entire bath
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Bath re-enamelling in Holbeach Hurn without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. If you are dealing with a coating lifting around the plughole and a bath that stays dull however much you clean it, we can help, on pressed steel baths, cast iron baths and basins & shower trays alike.
We stand behind the work with a one-year guarantee.
- Area
- Holbeach Hurn (PE12)
- Region
- Lincolnshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition for years:
- Wash away dyes and oils after use
- A quick wipe after use keeps limescale away
- Respect the curing time we give you
- Get any chip repaired quickly
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Covering Holbeach Hurn
Holbeach Hurn is about 10 miles east of Spalding, in Lincolnshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Holbeach Hurn is one of 732 places in Lincolnshire we cover.
Postcode districts we cover here: PE12. Local streets include Low Road, Marsh Road and Hurn Bank, all of which we cover. Neighbouring places we cover include Fleet Hargate (1 mile south), Gedney Dyke (2 miles south-east), Holbeach Bank (2 miles west), Holbeach (3 miles south-west) and Holbeach Clough (3 miles west). Further out, we also cover Boston (11 miles north), Spalding (10 miles west), Pinchbeck (10 miles west), Witham (12 miles north-west), Long Sutton (3 miles south-east) and Crowland (14 miles south-west).
Local landmarks in Holbeach Hurn
Locally, our jobs take us to homes close to University Academy Holbeach and St Luke and the streets around them. Nearby you’ll also find Fleet Motte (2.6 miles south).
Common questions in Holbeach Hurn
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit and until it has cured. The rest of the house is unaffected.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is it worth repairing rather than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the pictures can’t show what we need.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Should you replace it?
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. Otherwise, resurfacing generally wins. Prices start from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
What you get with us
- Honest advice, even when it means no job
- Rooms protected and left tidy
- Accredited with CHAS, Constructionline and SafeContractor
- Free fixed quotes from pictures
Read our prices page and bath cost comparison.
When to call us in Holbeach Hurn
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
The most common problems we’re called about are:
- An outdated colour you’d like to change
- Thin, worn enamel in places
- An old resurfacing that is failing
- Enamel that is lost its shine and feels rough
Questions to ask before you book
- How to care for the finish
- Whether they match the colour on site
- Whether the price covers travel
- How changes to the job are handled
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
When a repair isn’t the answer
Not everything can be repaired, and we’d rather say so up front. Repairs will not solve:
- A bath split right through the body
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think.
Materials we work on in Holbeach Hurn
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes most of the day. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can typically be used the day after.
How to prepare
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Mention any parking restrictions or tricky access
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote without visiting.
Read more
Towns and villages near Holbeach Hurn
Also in Holbeach Hurn
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
About our accreditations · Every repair comes with a one-year guarantee.
