Greater Manchester · England
Bath re-enamelling & resurfacing in Gorse Hill, Greater Manchester
Bath re-enamelling for Gorse Hill, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Chips and rust in more than one place
Bath re-enamelling in Gorse Hill, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, and can be used again the day after. Typical jobs include an old resurfacing that’s failing and a period or roll-top bath worth keeping, in basins & shower trays, acrylic baths and Victorian roll-tops.
All our work is covered by a one-year guarantee, wherever you are in Greater Manchester.
- Location
- Gorse Hill (M32, M21, M16)
- County
- Greater Manchester
- Cover
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Gorse Hill: your questions answered
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
There can be some smell while we work. It clears as the materials cure.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What happens after I send photos?
We come back with a fixed quote, plus dates. There’s no obligation to book.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
How to look after the repair
Nothing complicated is needed:
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What affects the price in Gorse Hill
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Access to the area
- How much damage there is
- What kind of damage it is
- Whether we combine several jobs
Compared with replacing, repairing normally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Send pictures for a quote
You can usually get a fixed price without us visiting. To make it quick:
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- Any details about the material
- Details of any past repairs
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. Quotes are free and you’re under no obligation.
When a repair isn’t the answer
To be straight with you, there are a few things a repair won’t fix:
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
Towns and villages near Gorse Hill
More services for Gorse Hill
Signs you need bath re-enamelling in Gorse Hill
Older baths frequently have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
People normally call us when they notice something like this:
- A period or roll-top bath worth keeping
- Stains that will not shift
- An old resurfacing that’s failing
- Lots of chips and rust spots
Questions to ask before booking
- Who will actually do the work
- If travel is included in the price
- How to care for the finish
- What protection goes down before work starts
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We regularly work with letting and managing agents. Send the address, pictures and access details.
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Plan for a full day from start to finish. Before leaving, we tell you how long to leave it and how to look after it.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Clear the area around the damage
- Let the surface dry out before the visit
Ask for a price
To get a price, send two or three photos using our quote form or ring us. We’ll tell you honestly if a repair is the right fix.
Read more
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
Gorse Hill and the surrounding area
Gorse Hill is about 3 miles north-east of Sale, in Greater Manchester. From the centre of Gorse Hill to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Our technicians cover all 72 towns and villages in Greater Manchester, from the larger towns to small villages.
All of M32, M21 and M16 is within our area. Local streets include Haig Road, Edge Lane and Kings Road, and we cover them all. Gorse Hill sits on or near the A56 and A5014, so getting to you is simple. Other places close to Gorse Hill include Firswood (1 mile east), Chorlton-cum-Hardy (1 mile south-east), Old Trafford (1 mile north-east), Ordsall (2 miles north-east) and Whalley Range (2 miles east). Larger places within reach include Manchester (4 miles north-east), Wythenshawe (4 miles south), Northern Quarter (3 miles north-east), Chinatown (3 miles north-east), Ancoats (3 miles north-east) and Broughton (4 miles north-east).
What’s near Gorse Hill
Locally, our jobs take us to homes close to Sale Water Park, Stretford High School and Gorse Hill Primary School, among other places. Other local landmarks include The Quadrant pub (within half a mile east), St. Hilda's Church (0.5 miles east) and St Clement's Church (0.9 miles south-east). For rail, the closest station is Trafford Park station, about 0.7 miles west of the centre. Further afield, we also cover the area around Lancashire County Cricket Club Museum (less than half a mile north-east) and Trafford Palazzo (2.2 miles north-west). Open spaces near Gorse Hill include Unicorn Grocery and Birch Moss Covert Nature Reserve.
- Local facilities include Municipal Borough of Stretford (0.6 miles west)
About our accreditations · Every repair comes with a one-year guarantee.
