Norfolk · England
Bath re-enamelling & resurfacing in Great Cressingham, Norfolk
Local bath re-enamelling for Great Cressingham: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Thin, worn enamel in places
How we handle bath re-enamelling in Great Cressingham
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Whether it’s wear marks under the taps and enamel that’s lost its shine and feels rough, we can normally put it right, whatever the material.
We guarantee the work for a year. If there’s a problem with the repair within the year, we return and sort it.
- Where
- Great Cressingham (IP25)
- Region
- Norfolk
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
What happens on the day
Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes a full day.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let us know if it has been repaired before
- Clear the area around the damage
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
When to call us in Great Cressingham
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Keep an eye out for these signs:
- A coating lifting around the plughole
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- Several chips and rust patches
What to look for in a quote
- Whether there are any call-out or travel charges
- How long it needs to cure
- The length of the guarantee and what it covers
- Aftercare advice
Great Cressingham questions
What happens once I’ve sent pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Does re-enamelling smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It fades as the coating cures.
How do I get a price for bath re-enamelling in Great Cressingham?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Towns and villages near Great Cressingham
Other services in Great Cressingham
Our work in Great Cressingham
Great Cressingham is about 11 miles south-west of Dereham, in Norfolk. Clients in Great Cressingham get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Great Cressingham is one of 797 places in Norfolk where we work.
Every address in IP25 is within our area, from the main roads to the quietest streets. We regularly work on streets such as The Street, St Michael's Crescent and The Buttlands and the roads around them. We also cover the places around Great Cressingham: Little Cressingham (2 miles south-east), South Pickenham (2 miles north), Hilborough (2 miles south-west), Ashill (3 miles north-east) and Saham Toney (3 miles east). Larger places within reach include Thetford (11 miles south), Dereham (11 miles north-east), Attleborough (12 miles east), Downham Market (15 miles west), Watton (4 miles east) and Swaffham (5 miles north).
Around Great Cressingham
Our clients here include homes close to Church of St Michael, among other places. Well-known places in the area include Desert Rats Museum (2.4 miles south-west). Green spaces nearby include Saham Mere.
Aftercare tips
Aftercare is simple:
- Have chips seen to early
- Wipe the bath dry after use in hard water areas
- Repair dripping taps early
- Do not let dyes or oils sit on the finish
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Why repair rather than replace?
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- One price list for the entire UK
- Rooms protected and left tidy
- Every repair guaranteed for a year
- Technicians who travel to you, UK-wide
Take a look at our full price list or resurfacing vs replacement cost guide.
What bath re-enamelling costs
Prices start from £350. You will know the full cost before you book. We look at:
- What the surface is made of
- Whether old repairs or coatings need taking off
- How much damage there is
- Where the damage is and how we get to it
The price reflects the work involved, not your postcode. You’ll see the full price before you book.
How to get a fixed price
Phone photos are fine. Just make sure we can see:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- A wider photo showing the whole bath
- Any earlier repairs or coatings
The quickest way to a price is to send two or three pictures using our quote form or call us. We will say straight away if a repair is the right fix.
When we’d advise against a repair
We will not take on work that will not last, so these are the limits:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath that is rusted through
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
