Lancashire · England
Bath Re-enamelling in Great Harwood
Problem with your bath in Great Harwood? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that’s seen better days
About our bath re-enamelling in Great Harwood
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. Typical jobs include staining under the taps and around the waste and worn patches where water runs and sits, across Victorian roll-tops, basins & shower trays and acrylic baths.
All of our repairs are guaranteed for twelve months. We return to put right any problem with the work.
- Location
- Great Harwood (BB6)
- Region
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in Great Harwood
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is typically as strong as ever.
The most common problems we are called about are:
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
- A coloured bath you want in white
- A coating lifting around the plughole
Before you book anyone
- How the colour is matched
- What protection goes down before work starts
- Who will actually do the work
- How long the guarantee is and what it covers
For landlords and businesses
If you manage property in Great Harwood, we can repair and quote for several addresses together. Send photos for each one and we will price them together.
Landlords, letting agents and housing providers in Great Harwood use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
Covering Great Harwood
Great Harwood is about 3 miles north-west of Accrington, in Lancashire. Customers in Great Harwood get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. Great Harwood is one of 482 places in Lancashire where we work. We work right across the region, from Great Harwood to Manchester (23 miles away).
Our visits in BB6 are booked in the same way as anywhere else. Whether you live on Station Road, Back Queen Street and Mill Street or anywhere nearby, we can come to you. Being close to the A680 and B6535, Great Harwood is easy for our technicians to reach. Close by, we cover Tottleworth (1 mile south), Rishton (1 mile south), York (2 miles north-west), Whitebirk (3 miles south-west) and Little Harwood (3 miles south-west). Larger places within reach include Preston (12 miles west), Burnley (7 miles east), Chorley (13 miles south-west), Bamber Bridge (11 miles west), Accrington (3 miles south-east) and Leyland (13 miles south-west).
Local landmarks in Great Harwood
Our clients here include homes close to St Bartholomew's Church, The Hyndburn Academy and The Tavern, among other places. The nearest railway station is Rishton station, roughly 1.7 miles south of the centre. Other landmarks nearby include Accrington Victoria Hospital (2.5 miles south-east) and Hapton Castle (3.5 miles east).
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Your questions about bath re-enamelling in Great Harwood
Does re-enamelling smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can you quote from pictures?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Do the materials smell?
There can be some smell while we work. It fades as everything cures.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
Do you cover the entire of Lancashire?
We work UK-wide. Our prices are the same everywhere.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What we do, step by step
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Ask for a price
To get a price, send two or three pictures using our quote form or call us. We will tell you honestly if a repair is the right fix.
Read more
What bath re-enamelling costs
Resurfacing from £350. There is no area surcharge for Great Harwood. The price reflects:
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- What the surface is made of
- The size and number of damaged areas
The price reflects the work involved, not your postcode. You’ll see the full price before you book.
Send pictures for a quote
Photographing the damage takes a minute. Try to send:
- Your postcode, so we can check dates
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through.
When a repair is not the answer
It helps to know what we can’t do too:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- Steel that has corroded right through
Not sure? Send photos and we will give you a straight answer.
What we work on
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Nearby places to Great Harwood
What else we do in Great Harwood
Repairing versus replacing in Great Harwood
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Why us?
- Same prices wherever you are
- CHAS and Constructionline accredited
- One visit for most repairs
- Nothing taken out or refitted
See our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
