Hampshire · England
Bath re-enamelling & resurfacing in Greatham, Hampshire
Bath re-enamelling for Greatham, without a refit. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that is lost its shine and feels rough
Greatham and nearby
Greatham is about 5 miles north-east of Petersfield, in Hampshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Greatham is one of 683 places in Hampshire we cover. We work right across the region, from Greatham to London (about 45 miles away).
Our visits in GU33 are booked in the same way as anywhere else. That includes homes on Longmoor Road, Wolfmere Lane and Todmore and the roads around them. If you’re just outside Greatham, we cover Longmoor (1 mile east), Woolmer (1 mile north), Liss Forest (1 mile south), Blackmoor (1 mile north) and The Mint (2 miles south). Within a short drive, we also cover Havant (15 miles south), Fleet (14 miles north), Horndean (13 miles south-west), Aldershot (13 miles north-east), Alton (7 miles north-west) and Waterlooville (15 miles south-west).
What’s near Greatham
Typical jobs here are in homes near Church of St John the Baptist and Greatham Primary School. For rail, the closest station is Liss station, about 2 miles south of the centre. Nearby you will also find The Romany Museum (2.9 miles north-west) and Chase Community Hospital (2.5 miles north-east). Green spaces nearby include Liss Riverside Railway Walk North and Selborne Hill.
Bath re-enamelling in Greatham, done in place
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It usually takes one visit, with the bath ready to use the following day. If you’re dealing with wear marks under the taps and a bath that stays dull however much you clean it, we can usually put it right, whatever the material.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Area
- Greatham (GU33)
- Area hub
- Hampshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
What we cannot put right
We won’t take on work that won’t last, so these are the limits:
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
If in doubt, send pictures and we’ll say what we think before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Repair dripping taps early
- Never use suction bath mats
- Don’t let dyes or oils sit on the finish
- Keep toiletries on a shelf rather than in the bath
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Let us know about parking or access
- Open a window if you can
- Avoid using the area for a few hours before we arrive
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Advice
Common problems we fix in Greatham
Hard water speeds up the wear, and abrasive cleaners do the most damage.
The most common problems we’re called about are:
- A coating lifting around the plughole
- Worn patches where water runs and sits
- Lots of chips and rust spots
- A bath that stays dull however much you clean it
Questions to ask before you book
- When it can be used again
- How to look after the finish
- Whether there are any call-out or travel charges
- What the guarantee covers, and for how long
For landlords and businesses
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
For anyone letting property in or around Greatham, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Also near Greatham
Other services in Greatham
Questions from Greatham
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Are there extra charges for Greatham?
Travel is included in the price, and we charge the same wherever you are.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It fades as everything cures.
How durable is a resurfaced bath?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
What areas do you cover?
We cover the entire UK, including Greatham and the rest of Hampshire. Send your postcode with your pictures and we will confirm dates.
What if the damage is worse than the photos show?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Repair or replace in Greatham?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Greatham customers choose us
- Every repair guaranteed for a year
- Honest advice, even when it means no job
- We leave the room as we found it
- CHAS and Constructionline accredited
Take a look at our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
