Hampshire · England
Bath re-enamelling & resurfacing in Longmoor, Hampshire
Bath re-enamelling for Longmoor, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A bath that stays dull however much you clean it
Common questions in Longmoor
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can you quote from photos?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we are working in. We’ll let you know when it’s safe to use again.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that is in the quote.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Bath re-enamelling at your home in Longmoor
After re-enamelling, the bath has a smooth, glossy, new-looking surface, but without the cost and upheaval of a refit. It suits anyone happy with the bathroom apart from the bath. Common call-outs are for a coloured bath you want in white and brown or grey marks that don’t clean off, in cast iron baths, Victorian roll-tops and pressed steel baths.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Longmoor (GU33)
- County
- Hampshire
- Warranty
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
Simple care helps the repair last. Our advice:
- Never use suction bath mats
- Clean with a soft cloth and mild detergent
- A dripping tap should be fixed promptly
- Don’t leave bottles, razors or sponges standing on the surface
Treat the new finish gently at first: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Towns and villages near Longmoor
What else we do in Longmoor
Longmoor and the surrounding area
Longmoor is about 3 miles south of Bordon, in Hampshire. We travel to homes and businesses in Longmoor and nearby villages, so nothing has to leave your home. Longmoor is one of 683 towns and villages in Hampshire we cover. We work right across the region, from Longmoor to London (about 45 miles away).
Our visits in GU33 work the same way as everywhere else we cover. We regularly work on streets such as Woolmer Road, Roberts Road and Methuen Road and the roads around them. We also travel to Greatham (1 mile west), Woolmer (1 mile north-west), Liss Forest (2 miles south-west), The Mint (2 miles south) and Blackmoor (2 miles north-west). Further out, we also cover Havant (15 miles south), Fleet (14 miles north), Horndean (13 miles south-west), Aldershot (13 miles north), Alton (7 miles north-west) and Waterlooville (15 miles south-west).
Local landmarks in Longmoor
Locally, our jobs take us to homes close to Greatham Primary School and the streets around them. The nearest railway station is Liss station, roughly 2.3 miles south-west. Nearby you’ll also find The Romany Museum (3.4 miles north-west) and Chase Community Hospital (2.3 miles north). Open spaces near Longmoor include Wheeler's Down and Liss Riverside Railway Walk North.
What a repair cannot fix
We will not take on work that won’t last, so these are the limits:
- A metal bath with a through crack
- Holes rusted through the metal
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
What affects the price in Longmoor
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Access to the area
- The material
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Getting a price from photos
You can take the photos on your phone, there is no need for anything special. Just ensure we can see:
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Where you are, by postcode
- A coin beside the damage so we can judge size
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. It must be solid and not flex underfoot.
What we’re called out for in Longmoor
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Send us a picture if you notice any of these:
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
- Staining under the taps and around the waste
- A dull, rough surface that won’t come clean
Before booking anyone
- What protection goes down before work starts
- What happens if the damage is worse than the pictures show
- If travel is included in the price
- Whether cleaning and preparation are in the price
How it works
Expect a friendly, tidy visit. We confirm the time with you beforehand, protect the area, and get on with the job, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the day after.
Preparing for the visit
- Ensure the area is dry
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
Get a quote
The quickest way to a price is to send two or three photos through our quote form or ring us. We will tell you honestly whether it can be repaired.
Read more
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Hampshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Repairing versus replacing in Longmoor
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing normally wins. Resurfacing from £350, with every job priced individually. Compared with replacing, repairing generally costs far less, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why us?
- We leave the room as we found it
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
Take a look at our full price list and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
