Kent · England
Bath Re-enamelling for Greatstone-on-Sea homes
Problem with your bath in Greatstone-on-Sea? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- Stains that will not shift
Bath re-enamelling at your home in Greatstone-on-Sea
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we don’t cut corners on it. Common call-outs are for a bath that stays dull however much you clean it and an old resurfacing that’s failing, in acrylic baths, pressed steel baths and cast iron baths.
You’re covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Area
- Greatstone-on-Sea (TN28)
- County
- Kent
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
The process
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job generally takes the best part of a day. We tidy up before we leave and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Make sure the room can be ventilated
- Have somewhere for us to park nearby if possible
- Mention any earlier repairs or resurfacing
How to get a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Advice
Places near Greatstone-on-Sea
What else we do in Greatstone-on-Sea
Repairing versus replacing in Greatstone-on-Sea
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why Greatstone-on-Sea clients choose us
- Colour-matched on site
- A year’s guarantee on all work
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
See our pricing and resurfacing vs replacement cost guide.
Greatstone-on-Sea and the surrounding area
Greatstone-on-Sea is about 9 miles south-west of Hythe, in Kent. Wherever you are in the TN28 postcode area, we come to you. Greatstone-on-Sea is one of 922 towns and villages in Kent we cover. We work right across the region, from Greatstone-on-Sea to London (about 58 miles away).
Our repair technicians cover all of the TN28 postcode area and the streets around it. Streets in the area include Alfred Road, Meehan Road South and Hardy Road. If you are just outside Greatstone-on-Sea, we cover Littlestone-on-Sea (1 mile north), New Romney (1 mile north-west), Lydd-on-Sea (2 miles south), Lydd (3 miles south-west) and St Mary's Bay (3 miles north). Within a short drive, we also cover Ashford (12 miles north), Folkestone (12 miles north-east), Hythe (9 miles north-east), Hawkinge (13 miles north-east), Tenterden (14 miles north-west) and Cheriton (11 miles north-east).
Landmarks near Greatstone-on-Sea
Locally, our jobs take us to homes close to St Peter's, The Marsh Academy and Romney Warren Country Park, among other places. Also close by are Greatstone Primary School (0.5 miles south), The Jolly Fisherman pub (under half a mile south) and The Marsh Academy (1.3 miles north-west). Well-known places in the area include Romney 'castle' (3.2 miles north-west) and Lydd Town Museum (2.8 miles south-west). For a walk, there is Dungeness National and Burnthouse Pen.
What we cannot put right
A repair isn’t right for every job, including:
- A metal bath with a through crack
- Steel that has corroded right through
- Leaks from fittings rather than the bath
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we work on in Greatstone-on-Sea
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Do you need bath re-enamelling in Greatstone-on-Sea?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Signs it’s time to call us include:
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
- A bath that stays dull however much you clean it
Questions to ask before you book
- Whether the price covers travel
- How long it needs to cure
- Whether they match the colour on site
- How your room will be protected
Can I fix it myself?
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- What the surface is made of
- How many items we do on one visit
- Any earlier repairs that need removing first
- The colour and finish to match
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Send pictures for a quote
You can normally get a fixed price without us visiting. To help us price it:
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Any earlier repairs or coatings
- The postcode, so we can plan the visit
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Questions from Greatstone-on-Sea
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.
Is there a call-out fee?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Do the materials smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
What information do you need?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
Can a failed resurfacing be redone?
Generally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we’ll plan for it.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
