Kent · England
Bath Re-enamelling for Lydd-on-Sea homes
Bath re-enamelling in Lydd-on-Sea without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Thin, worn enamel in places
Repairing versus replacing in Lydd-on-Sea
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before you book.
What you get with us
- We come to you, anywhere in the UK
- We’ll tell you if it’s not worth repairing
- One price list for the whole UK
- A fixed quote before booking
Take a look at our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Lydd-on-Sea, done in place
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. We are often asked to fix brown or grey marks that don’t clean off and a roll-top that’s seen better days, across basins & shower trays, acrylic baths and pressed steel baths.
You get a one-year guarantee, the same in Lydd-on-Sea as everywhere else we work.
- Area
- Lydd-on-Sea (TN29, TN28)
- County
- Kent
- Cover
- A year, on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Lydd-on-Sea
More services for Lydd-on-Sea
When to call us in Lydd-on-Sea
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
People typically call us when they notice one of these:
- Wear marks under the taps
- An original cast iron bath that needs restoring
- Staining under the taps and around the waste
- A coating lifting around the plughole
Before you book anyone
- Who will actually do the work
- Aftercare advice
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Use washing-up liquid and a soft cloth
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Questions from Lydd-on-Sea
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Can you price it without visiting?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Is my repair covered?
All our work carries a one-year guarantee. Ask us what it covers when you get your quote.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
What do you need from me?
Use the quote form or ring 0345 017 0787, and we’ll take it from there.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
What bath re-enamelling costs
Resurfacing from £350. You will know the full cost before you book. We take into account:
- Doing more than one item at once
- Whether old repairs or coatings need taking off
- What the surface is made of
- How hard the colour is to match
The price reflects the work involved, not where you live. The full price is agreed before booking.
Getting a price from photos
You can generally get a fixed price without us visiting. To make it quick:
- Something in shot to show the size
- A photo taken from further back
- The material, if you know it
- Your postcode, so we can check dates
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
What we do, step by step
You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and get going once we have agreed what we are doing. Most jobs take a full day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Point us to the nearest place to park
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
Get a quote
Send us a photo of the damage and one of the whole item, and tell us you’re in Lydd-on-Sea, and we’ll reply with a fixed quote.
Advice
Landlord and trade work in Lydd-on-Sea
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
For anyone letting property in or around Lydd-on-Sea, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
What we can’t put right
To be straight with you, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
If in doubt, send photos and we’ll say what we think.
Materials we work on in Lydd-on-Sea
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Lydd-on-Sea and nearby
Lydd-on-Sea is about 10 miles south-west of Hythe, in Kent. Clients in Lydd-on-Sea get the same service as everywhere else we cover: a fixed quote from your pictures, and a technician at your door on the day. We cover 922 places across Kent, from the larger towns to small villages. Our nearest city page is London, about 60 miles away.
Our technicians cover all of the TN29 and TN28 postcode area and the streets around it. Streets in the area include Taylor Road, Lade Fort Crescent and Williamson Road, and we cover them all. If you’re just outside Lydd-on-Sea, we cover Greatstone-on-Sea (2 miles north), Dungeness (2 miles south), Littlestone-on-Sea (2 miles north), Lydd (2 miles west) and New Romney (3 miles north). Larger places within reach include Ashford (14 miles north), Folkestone (13 miles north-east), Hythe (10 miles north-east), Hawkinge (14 miles north-east), Tenterden (15 miles north-west) and Cheriton (12 miles north-east).
Around Lydd-on-Sea
Around Lydd-on-Sea, we work in homes near Greatstone Primary School and St Peter's. Other landmarks nearby include Romney 'castle' (4.2 miles north-west) and Lydd Town Museum (2.5 miles west). For a walk, there’s Dungeness National and Burnthouse Pen.
About our accreditations · Every repair comes with a one-year guarantee.
