East Riding of Yorkshire · England
Bath re-enamelling & resurfacing in Grimston, East Riding of Yorkshire
Our technicians come to Grimston for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- An outdated colour you’d like to change
- Lots of chips and rust spots
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- How much damage there is
- Unusual colours or finishes
- What the surface is made of
- The type of damage
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send pictures for a quote
Phone pictures are fine. Make sure they show:
- Whether it’s been repaired or coated before
- Daylight if possible, and no flash reflection
- One picture of the whole bath
- The material, if you know it
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
Bath re-enamelling in Grimston without replacing anything
We don’t move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, with the bath ready to use the following day. Common call-outs are for a period or roll-top bath worth keeping and an outdated colour you’d like to change, on acrylic baths, pressed steel baths and Victorian roll-tops.
Older homes around Grimston may have baths that have been in place for decades. A sound older bath is well worth repairing without disturbing the rest of the room.
You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll sort it.
- Where
- Grimston (HU11)
- Area hub
- East Riding of Yorkshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Grimston as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Your questions about bath re-enamelling in Grimston
Is it worth repairing old baths in a period home in Grimston?
In most cases: period pieces can be hard to match if replaced. Send pictures and we will advise.
Will you travel to Grimston?
Yes, we cover the whole UK, villages included.
Are there extra charges for Grimston?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What happens after I send pictures?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
How soon can you come?
That depends on our diary for your area. We will offer you dates when we send your quote.
How much does bath re-enamelling cost in Grimston?
Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
DIY kit or professional repair?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
What happens on the day
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it. Somewhere as small as Grimston, access is usually the main thing to plan. Once on site, the job is the same as anywhere.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Avoid using the area for a few hours before we arrive
- Ensure the room can be ventilated
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
Other services in Grimston
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Baths in Grimston homes
Grimston is about 12 miles east of Kingston upon Hull, in East Riding of Yorkshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Our technicians cover all 299 towns and villages in East Riding of Yorkshire. Our nearest city page is Leeds, about 61 miles away.
Jobs in HU11 work the same way as everywhere else we cover. If you are just outside Grimston, we cover Hilston (1 mile south), Owstwick (2 miles south), Tunstall (3 miles south-east), Roos (3 miles south) and Rimswell (4 miles south-east). Larger places within reach include Beverley (15 miles west), Cottingham (15 miles west), Hornsea (9 miles north-west), Hedon (7 miles south-west), Withernsea (6 miles south-east) and Owthorne (6 miles south-east).
Local landmarks in Grimston
A little further out are Aldbrough Castle (3.4 miles north-west).
How to care for the repair
It’s all simple stuff:
- Keep toiletries on a shelf rather than in the bath
- Don’t let dyes or oils sit on the finish
- Dry the bath after use to stop limescale
- Keep suction mats out of the bath
A quick rinse and wipe after use helps, especially in hard water areas, to stop limescale building up.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Steel that has corroded right through
- Leaks from fittings rather than the bath
- A bath split right through the body
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
Signs you need bath re-enamelling in Grimston
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Typical reasons for a call-out include:
- An outdated colour you’d like to change
- Wear marks under the taps
- A roll-top that’s seen better days
- Stains that won’t shift
If you live in one of the older homes near a church such as Church of St Michael, it may still have its original cast iron bath, which is well worth repairing or re-enamelling rather than replacing.
What your quote should include
- How soon you can use it again
- How to look after the finish
- Who turns up on the day
- How long the guarantee is and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
