East Riding of Yorkshire · England
Bath Re-enamelling in Withernsea
Fixed-price bath re-enamelling in Withernsea and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Wear marks under the taps
When to call us in Withernsea
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
If you can see any of these, send us a photo:
- A bath that stays dull however much you clean it
- A coating lifting around the plughole
- Thin, worn enamel in places
- Chips and rust in more than one place
What your quote should include
- How your room will be protected
- How to look after the finish
- Whether the colour is mixed to match
- What preparation is included
Bath re-enamelling in Withernsea, done in place
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. We work on Victorian roll-tops, cast iron baths and basins & shower trays, and the jobs we see most are a coloured bath you want in white and a coating lifting around the plughole.
You get a one-year guarantee, the same in Withernsea as everywhere else we work.
- Location
- Withernsea (HU19)
- Area hub
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
More services for Withernsea
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
What we can’t put right
In fairness, some problems need a different fix:
- Holes rusted through the metal
- A bath split right through the body
- Anything hidden under an old coating, until we remove it
Not sure? Send pictures and we will give you a straight answer before booking.
Materials we work on in Withernsea
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Keep suction mats out of the bath
- Stick to gentle, non-abrasive cleaners
- Wipe the bath dry after use in hard water areas
- Keep toiletries on a shelf rather than in the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Your questions about bath re-enamelling in Withernsea
Which areas do you work in?
Everywhere in the UK, Withernsea included. There is no extra charge for travel.
Do you work for landlords and businesses?
Yes, frequently. We can quote for several properties together and work between tenancies.
How do I book?
Some photos, your postcode and how to reach you. On the day, we only need access to the room.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
Landlords, agents and businesses in Withernsea
We regularly work with letting and managing agents. Send the address, pictures and access details.
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The type of damage
- How hard the colour is to match
- The size and number of damaged areas
- Doing more than one item at once
Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
To get a price, send two or three pictures using our quote form or call us. We will say straight away if a repair is the right fix.
Our work in Withernsea
Withernsea is about 12 miles north of Cleethorpes, in East Riding of Yorkshire. Jobs in Withernsea are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Our technicians cover all 299 towns and villages across East Riding of Yorkshire. Our jobs stretch from Withernsea to Leeds (65 miles away).
Every address in HU19 is within our area. We regularly work on streets such as Station Road, Park Avenue and Scott Gardens. Withernsea is on the A1033 and B1242, which makes it straightforward to reach. Close by, we cover Owthorne (1 mile north), Hollym (2 miles south), Rimswell (2 miles north-west), Winestead (3 miles south-west) and Tunstall (3 miles north-west). Within a short drive, we also cover Hornsea (15 miles north-west), Hedon (9 miles west), Preston (10 miles west), Keyingham (6 miles west), Bilton (12 miles west) and Patrington (4 miles south-west).
Landmarks near Withernsea
In Withernsea, that means homes near Withernsea Primary School, Church of St Nicholas and Withernsea High School. Nearby you will also find Withernsea Hospital (less than half a mile north-west) and Withernsea Lighthouse Museum (within half a mile north-west).
How the visit works
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. You can expect it to take a full day.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Keep a parking space free if you can
Get a quote
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
