Kent · England
Bath Re-enamelling for Weavering homes
Bath re-enamelling in and around Weavering: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Staining under the taps and around the waste
- Thin, worn enamel in places
How we handle bath re-enamelling in Weavering
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s a roll-top that’s seen better days and chips and rust in more than one place, we can help, whatever the material.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Where
- Weavering (ME14, ME15)
- County
- Kent
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Weavering
Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Do you need bath re-enamelling in Weavering?
Many baths we resurface have simply been well used. The body of the bath is generally perfectly sound.
If you can see any of these, send us a picture:
- Lots of chips and rust spots
- A roll-top that is seen better days
- Wear marks under the taps
- Staining under the taps and around the waste
Questions to ask before you book
- What preparation is included
- Whether a trained technician does the job
- The length of the guarantee and what it covers
- What happens if they find more damage
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Looking after it afterwards
So the finish stays in good condition for years:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Don’t leave bottles, razors or sponges standing on the surface
- Stick to gentle, non-abrasive cleaners
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
How the visit works
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
How to prepare
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Clear toiletries, mats and anything else from around the area
Get a quote
For a price in Weavering, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Read more
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- The colour and finish to match
- The material
- Previous DIY repairs that have to come out
- What kind of damage it is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.
Getting a price from photos
Almost every job we do is priced from pictures. This is what we need:
- One sharp close-up of the damage
- One picture of the entire bath
- Something in shot to show the size
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Your questions about bath re-enamelling in Weavering
Do you hold any accreditations?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
Someone resurfaced my bath and it’s peeling. Can you help?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Towns and villages near Weavering
Also in Weavering
Repairing versus replacing in Weavering
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. We charge the same wherever you are, with no extra for Weavering. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- CHAS and Constructionline accredited
- Colour mixed on the day to match
- Dust sheets down, tidy finish
- Most jobs done in one visit
Take a look at our pricing and resurfacing vs replacement cost guide.
Our work in Weavering
Weavering is about 1 mile east of Maidstone, in Kent. Whether you are in the middle of Weavering or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover all 922 towns and villages in Kent, from the larger towns to small villages. We work right across the region, from Weavering to London (about 32 miles away).
Here we cover the ME14 and ME15 postcode area. You will find streets such as Ames Avenue, Birkdale Lane and Fauchon's Lane. Neighbouring places we cover include Bearsted (1 mile east), Grove Green (1 mile north-west), Penenden Heath (1 mile north-west), Foley Park (1 mile north-west) and Shepway (1 mile south-west). Within a short drive, we also cover Sittingbourne (9 miles north-east), Gravesend (13 miles north-west), Tonbridge (13 miles south-west), Faversham (14 miles east), Northfleet (14 miles north-west) and Minster (15 miles north-east).
What’s near Weavering
Locally, our jobs take us to homes close to Vinters Valley Park, Holy Cross Church and Bell Inn and the streets around them. You will also find Valley Park School (1 mile west) and Maidstone (within half a mile west). Weavering’s nearest station is Bearsted station, about 0.8 miles east of the centre. Further afield, we also cover the area around Maidstone Carriage Museum (1.6 miles west) and The Mall Maidstone (1.4 miles west). Green spaces nearby include Detling Hill.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
If you do try a kit, read the instructions carefully, and give it the full curing time. If it does not work out, we can still repair it properly.
About our accreditations · Every repair comes with a one-year guarantee.
