Greater London · England
Bath Re-enamelling in Gunnersbury
Fixed-price bath re-enamelling in Gunnersbury and the surrounding area, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
What we do, step by step
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the job itself takes the best part of a day. At the end we talk you through the curing time and the aftercare.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
Getting a price
If you’re in Gunnersbury and want a price, photos are the quickest way: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Read more
How we handle bath re-enamelling in Gunnersbury
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Whether it’s staining under the taps and around the waste and a period or roll-top bath worth keeping, we can help, whatever the material.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Gunnersbury (W4, W3, TW8)
- Region
- Greater London
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Straight answers about what a repair can do
- Free fixed quotes from pictures
- CHAS and Constructionline accredited
- Technicians who travel to you, UK-wide
Take a look at our prices page or guide to resurfacing and replacement costs.
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Questions from Gunnersbury
Will there be fumes?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will there be a smell?
Expect a mild smell while we are working.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
How soon can you come?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
How do I book?
A close-up, a wider photo and your postcode. After that, we just agree a date.
Do you charge for travel?
We do not add a call-out fee. The fixed price covers the visit and the work.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted.
How we price bath re-enamelling
Prices start from £350. Each job gets its own fixed price. This is what makes a difference:
- The material and finish
- What kind of damage it is
- Access to the area
- Doing more than one item at once
A repair is priced on what needs doing, not your postcode. You’ll see the full price before you book, with no extras added later.
Getting a price from photos
Two or three clear photos are usually enough. Try to include:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- The postcode, so we can plan the visit
- One picture of the entire bath
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
What a repair can’t fix
Some jobs aren’t right for a repair, including:
- Anything hidden under an old coating, until we remove it
- A cast iron or steel bath that’s cracked right through
- An acrylic bath that flexes badly underfoot
Send us pictures and we’ll tell you honestly before booking.
Materials we work on in Gunnersbury
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Aftercare tips
It’s all simple stuff:
- Have chips seen to early
- A quick wipe after use keeps limescale away
- Avoid suction-cup mats
- Respect the curing time we give you
Use mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Covering Gunnersbury
Gunnersbury is about 1 mile south of Acton, in Greater London. We agree a date that works for you, and you’ll know when to expect us, so you’re not left waiting in all day. Our repair technicians cover 764 places across Greater London, from the larger towns to small villages. Our jobs stretch from Gunnersbury to London (about 8 miles away).
Jobs in W4, W3 and TW8 work the same way as everywhere else we cover. That includes homes on Kew Road, Kent Road and Power Road and the roads around them. You will find Gunnersbury on the A3000, which makes it straightforward to reach. Other places close to Gunnersbury include Strand-on-the-Green (1 mile south), Kew (1 mile south), Grove Park (1 mile south-east), Chiswick (1 mile east) and Turnham Green (1 mile south-east). Larger places within reach include London (8 miles east), City of Westminster (6 miles east), Marylebone (6 miles east), Kensington (3 miles east), St Pancras (7 miles east) and Shoreditch (9 miles east).
Around Gunnersbury
Locally, our jobs take us to homes close to Library for Iranian Studies, Kew College Prep and Ark Acton Academy. You will also find Turnham Green (0.5 miles east), Clayton Hotel Chiswick (within half a mile south-west), Strand-on-the-Green Junior School (within half a mile south-west) and St Michael's Church (0.5 miles south-east). Gunnersbury has its own railway station: Gunnersbury station. Other landmarks nearby include Livat Hammersmith (2.1 miles east) and Municipal Borough of Acton (1 mile north-east). Open spaces near Gunnersbury include Kew Gardens Lake and Castlebar Hill.
Also near Gunnersbury
Other services in Gunnersbury
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Housing associations and facilities teams use us for planned and reactive repairs in Greater London and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
About our accreditations · Every repair comes with a one-year guarantee.
