Greater London · England

Bath Re-enamelling in Hadley Wood

Bath re-enamelling in Hadley Wood without the cost of replacing. Get a fixed price from your photos, then we come to you.

  • Resurfacing from £350
  • A bath in a colour that no longer suits
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Hadley Wood homes

Bath re-enamelling in Hadley Wood without replacing anything

Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. We’re often asked to fix an original cast iron bath that needs restoring and thin, worn enamel in places, on acrylic baths, Victorian roll-tops and pressed steel baths.

We stand behind the work with a one-year guarantee.

Area
Hadley Wood (EN4, EN5)
Region
Greater London
Guarantee
12 months on all our work
Quotes
From £350. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Before and after: an old basin refinished to bright white

What affects the price in Hadley Wood

Resurfacing from £350. We don’t charge extra for travel to Hadley Wood. The price depends on:

  • Where the damage is and how we get to it
  • Whether old repairs or coatings need taking off
  • The material
  • What kind of damage it is

Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

Send pictures for a quote

Most quotes are done from pictures alone. To make it quick:

  • Good light, ideally daylight, without flash glare
  • A picture taken from further back
  • Details of any past repairs
  • The material, if you know it

Upload a picture of the damage and one of the entire item, and tell us you are in Hadley Wood, and we’ll come back with a fixed quote.

How the visit works

We begin by going over the job with you, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take a full day, and we’ll tell you if anything changes.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures until the day after.

Before we arrive

  • Have a window or extractor fan available
  • Mention any earlier repairs or resurfacing
  • Let us know which floor the room is on

How to get a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.

Get a fixed quote

Read more

For landlords and businesses

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

If you manage property in Hadley Wood, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

About Hadley Wood

Hadley Wood is about 1 mile north-east of Barnet, in Greater London. Clients in Hadley Wood get the same service as everywhere else we cover: a fixed quote from your photos, then a visit to do the work. Our repair technicians cover 764 places in Greater London. Our nearest city page is London, about 12 miles away.

Every address in EN4 and EN5 is within our area. You will find streets such as Hertford Road, Bartrams Lane and Parkgate Avenue. We also travel to Cockfosters (1 mile south-east), Monken Hadley (1 mile west), New Barnet (1 mile south), Barnet (1 mile south-west) and Underhill (1 mile south-west). Further out, we also cover London (12 miles south), City of Westminster (10 miles south), Marylebone (10 miles south), Kensington (11 miles south), St Pancras (10 miles south) and Shoreditch (10 miles south-east).

Landmarks near Hadley Wood

In Hadley Wood, that means homes near Livingstone Primary and Nursery School, Tudor Sports Ground and JCoSS. Nearby too are Trent School Cockfosters (1.1 miles south-east), St Paul's Church (within half a mile north) and The Hadley Hotel (0.6 miles south-west). The nearest railway station is Hadley Wood station, roughly 0.5 miles north. Nearby you’ll also find Barnet General Hospital (2 miles south-west) and Potters Bar Museum (2.5 miles north). Open spaces near Hadley Wood include Covert Way and Darland's Lake.

  • Other local spots include East Barnet Urban District (1.4 miles south)
Map of Hadley Wood © OpenStreetMap contributors

Why repair rather than replace?

Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Prices start from £350. Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Why us?

  • Nothing taken out or refitted
  • Free fixed quotes from pictures
  • Every repair guaranteed for a year
  • Colours mixed by hand to suit your surface

Take a look at our full price list or guide to resurfacing and replacement costs.

FAQs for Hadley Wood

Will the price change on the day?

It’s rare, but if it happens we talk to you first. The price only changes if you agree.

Do you work in Hadley Wood?

Yes, we do. We send a technician to Hadley Wood for every job, and the price is the same as everywhere else.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Someone resurfaced my bath and it’s peeling. Can you help?

Normally, yes. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.

Do you need to take the bath out?

Not at all. We work on the bath in place, with the room protected and ventilated.

How much does bath re-enamelling cost in Hadley Wood?

Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your EN4 postcode.

How durable is a resurfaced bath?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.

What do you need from me?

Use the quote form or ring 0345 017 0787, and we’ll take it from there.

When we’d advise against a repair

In fairness, some problems need a different fix:

  • Leaks from fittings rather than the bath
  • A metal bath with a through crack
  • Damage hidden under a previous coating, until it’s stripped back

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Basins & shower trays
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops
  • Cast iron baths

Different materials, different repairs

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

Looking after it afterwards

Much of the damage we repair could have been avoided. These habits help:

  • Wash away dyes and oils after use
  • Respect the curing time we give you
  • Keep toiletries on a shelf rather than in the bath
  • Don’t leave a chip unrepaired

The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.

If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.