Cumbria · England
Bath re-enamelling & resurfacing in Haile, Cumbria
Full bath re-enamelling and resurfacing at your home in Haile, with a one-year guarantee on every repair.
- Resurfacing from £350
- An old resurfacing that’s failing
- Staining under the taps and around the waste
When a repair is not the answer
We will always be straight with you, so here’s what a repair will not do:
- Leaking taps or wastes (a plumber’s job)
- Problems we can’t see until an old finish comes off
- A cast iron or steel bath that is cracked right through
If in doubt, send photos and we’ll say what we think.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
About our bath re-enamelling in Haile
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s staining under the taps and around the waste and an old resurfacing that’s failing, we can help, on Victorian roll-tops, acrylic baths and basins & shower trays alike.
All our work comes with our one-year guarantee, wherever you are in Cumbria.
- Area
- Haile (CA22)
- Region
- Cumbria
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Towns and villages near Haile
More services for Haile
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Covering Haile
Haile is about 6 miles south-east of Whitehaven, in Cumbria. Jobs in Haile are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Haile is one of 438 towns and villages in Cumbria we cover. Our nearest city page is Liverpool, about 76 miles away.
Every address in CA22 is covered, from the main roads to the quietest streets. Close by, we cover Thornhill (1 mile west), Beckermet (1 mile south-west), Wilton (2 miles north), Calder Bridge (2 miles south) and Egremont (2 miles north-west). We also work in nearby towns such as Workington (12 miles north), Whitehaven (6 miles north-west), Cockermouth (15 miles north), Moorclose (12 miles north), Cleator Moor (4 miles north) and Bransty (7 miles north-west).
Near you in Haile
Around Haile, we work in homes near Haile Church and West Lakes Academy, among other places. For rail, the closest station is Braystones station, roughly 2.6 miles south-west. A little further out are Caernarvon Castle (1.1 miles south-west) and West Cumberland Hospital (5.4 miles north-west). Not far away are Clints Quarry and Ponsonby Fell.
Haile questions
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we’ll reply with the earliest dates.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
How long is the bath unusable?
Normally one day, with the bath ready the day after. Deeply pitted baths may need a second day.
Which areas do you work in?
We cover the whole UK, including Haile and the rest of Cumbria. Just include your postcode and we will offer you dates.
What happens next?
You will get a fixed quote back, usually with dates to choose from. There is no obligation to book.
What do you need from me?
Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.
How do I get a price for bath re-enamelling in Haile?
Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the entire item and your postcode.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How the visit works
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which typically takes most of the day. If anything looks different from your photos, we’ll talk to you before going ahead.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Tell us about any previous repairs or coatings
- Tell us if there are stairs or a lift
- Let the surface dry out before the visit
Getting a price
We price from pictures so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Advice
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Prices and what affects them
Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- Unusual colours or finishes
- How many areas need work
The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Send photos for a quote
Good photos mean an accurate price. Here’s what helps:
- The material, if you know it
- A coin or ruler next to the damage for scale
- Whether it’s been repaired or coated before
- A close-up of the damage, in focus
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote the same day in most cases.
Signs you need bath re-enamelling in Haile
Older baths frequently have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Common reasons people in Haile contact us include:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- Stains that won’t shift
- A peeling or bubbling previous coating
Questions to ask before you book
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- What happens if they find more damage
- Whether they match the colour on site
Keeping it looking good
It’s all simple stuff:
- Clean with a soft cloth and mild detergent
- Do not leave a chip unrepaired
- Avoid suction-cup mats
- Fix dripping taps quickly
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
