Derbyshire · England
Bath re-enamelling & resurfacing in Hammersmith, Derbyshire
Bath re-enamelling in Hammersmith without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A roll-top that is seen better days
- Stains that won’t shift
Why repair rather than replace?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- Rooms protected and left tidy
- Usually one visit, start to finish
- We’ll tell you if it’s not worth repairing
See our full price list and resurfacing vs replacement cost guide.
How we handle bath re-enamelling in Hammersmith
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s a peeling or bubbling previous coating and a dull, rough surface that won’t come clean, we can help, on acrylic baths, Victorian roll-tops and basins & shower trays alike.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Hammersmith (DE5)
- County
- Derbyshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
A repair is not always the answer, and we’ll tell you before we start. We cannot fix:
- Anything hidden under an old coating, until we remove it
- A poorly supported acrylic bath, until it’s firmed up
- A bath split right through the body
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Our work in Hammersmith
Hammersmith is about 1 mile north of Ripley, in Derbyshire. From the centre of Hammersmith to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Hammersmith is one of 532 towns and villages in Derbyshire where we work. Our nearest city page is Manchester, about 44 miles away.
We cover every part of the DE5 postcode area and the streets around it. From Moss Lane, Asher Lane and Butterley Lane or anywhere nearby, we can come to you. With the A38 close by, Hammersmith is easy for our repair technicians to reach. Other places close to Hammersmith include Butterley (1 mile east), Pentrich (1 mile north-west), Lower Hartshay (1 mile west), Ripley (1 mile south) and Pentrichlane-end (1 mile west). Larger places within reach include Chesterfield (12 miles north), Ilkeston (7 miles south-east), Long Eaton (13 miles south-east), Belper (3 miles south-west), Heanor (4 miles south-east) and Bolsover (13 miles north-east).
Around Hammersmith
In Hammersmith, that means homes near Lons Infant School, Swanwick Hall School and Mill Hill School, among other places. Other local landmarks include The Red Lion pub (0.6 miles south) and All Saints' Church (0.6 miles south). The nearest railway station is Ambergate station, about 2.9 miles west of the centre. Further afield, we also cover the area around Ripley Hospital (0.8 miles south) and Codnor Castle (2.5 miles south-east). Green spaces nearby include Wyver Lane Nature Reserve.
Your questions about bath re-enamelling in Hammersmith
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
Is the work guaranteed?
Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.
Can you do the outside of a roll-top?
Yes. Inside and out.
Can you quote from photos?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
How do I get a price for bath re-enamelling in Hammersmith?
Resurfacing from £350. Every job gets a fixed price from your photos. Send a close-up and a picture of the entire item with your DE5 postcode.
Prices and what affects them
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- How many items we do on one visit
- Access to the area
- How hard the colour is to match
- Previous DIY repairs that have to come out
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before booking.
Send pictures for a quote
We price nearly every job from pictures. This is what we need:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- The material, if you know it
- A picture taken from further back
To get a price, send two or three pictures through our quote form or call us. We’ll say immediately whether it can be repaired.
Towns and villages near Hammersmith
More services for Hammersmith
How to look after the repair
A little care keeps the finish looking good. We recommend:
- Dry the bath after use to stop limescale
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Clean with a soft cloth and mild detergent
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, and we finish with a tidy-up and a look at the finished work together.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Make sure the area is dry
- Move bottles, mats and clutter away from the area
Ask for a price
You do not need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Signs you need bath re-enamelling in Hammersmith
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
Most people contact us when they notice something like this:
- A roll-top that’s seen better days
- A coating lifting around the plughole
- Wear marks under the taps
- A dull, rough surface that will not come clean
Before you book anyone
- If travel is included in the price
- The length of the guarantee and what it covers
- How the room is protected while they work
- Whether a trained technician does the job
About our accreditations · Every repair comes with a one-year guarantee.
