Lancashire · England
Bath Re-enamelling in Hampson Green
Bath re-enamelling in Hampson Green without the cost of replacing. Send us pictures for a fixed price, then book a visit.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Stains that will not shift
Common problems we fix in Hampson Green
Frequently the bath has just had decades of use, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
Common reasons people in Hampson Green contact us are:
- Brown or grey marks that don’t clean off
- Several chips and rust patches
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
Comparing quotes
- How changes to the job are handled
- The length of the guarantee and what it covers
- When it can be used again
- How the room is protected while they work
How we handle bath re-enamelling in Hampson Green
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair cast iron baths, basins & shower trays and acrylic baths, and the jobs we see most are lots of chips and rust spots and staining under the taps and around the waste.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Hampson Green (LA2)
- County
- Lancashire
- Guarantee
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Landlord and trade work in Hampson Green
Landlords, letting agents and housing providers in Hampson Green use us as well as householders. Repairing between tenancies keeps void periods short, and it normally costs far less than a refit.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Nearby places to Hampson Green
Also in Hampson Green
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Hampson Green
- Work done at your home or business
- We leave the room as we found it
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
See our full price list or bath cost comparison.
Hampson Green: your questions answered
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Does the bath have to be removed?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Do you cover the whole of Lancashire?
All of Lancashire, and the rest of the UK. Travel is included in the price.
Can I add another job to the visit?
Yes, and it’s often cheaper. Just add the extra items to your pictures and you’ll get one combined price.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
How to care for the repair
Good habits make a big difference to how long a repair lasts:
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
- Do not let dyes or oils sit on the finish
- Fix dripping taps quickly
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
About Hampson Green
Hampson Green is about 5 miles south of Lancaster, in Lancashire. We travel to homes and businesses in Hampson Green, so you do not need to take anything anywhere. Our technicians cover 482 places across Lancashire. Our jobs stretch from Hampson Green to Liverpool (about 40 miles away).
Our visits in LA2 work the same way as everywhere else we cover. We also cover the places around Hampson Green: Bay Horse (1 mile south-east), Potters Brook (1 mile south), Galgate (1 mile north-west), Ellel (1 mile north) and Forton (2 miles south). Within a short drive, we also cover Preston (15 miles south), Lancaster (5 miles north), Morecambe (7 miles north-west), Fulwood (14 miles south), Fleetwood (11 miles south-west) and Thornton (12 miles south-west).
Near you in Hampson Green
Locally, our jobs take us to homes close to Church of St Mary, among other places. The nearest railway station is Lancaster station, about 4.9 miles north of the centre. Well-known places in the area include Lancaster Castle (4.9 miles north) and Royal Lancaster Infirmary (4.4 miles north). The countryside around Hampson Green includes Harrisend Fell.
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed price from photos. These are the things that affect it:
- Previous DIY repairs that have to come out
- Doing more than one item at once
- The colour and finish to match
- How easy the damage is to reach
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- Whether it’s been repaired or coated before
- One picture of the whole bath
- A clear, close picture of the problem area
- Any details about the material
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
What we do, step by step
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It typically takes most of the day, and you are welcome to carry on with your day while we work.
- The room is masked, protected and ventilated.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
