Lancashire · England
Bath Re-enamelling for Potters Brook homes
Problem with your bath in Potters Brook? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Chips and rust in more than one place
Your questions about bath re-enamelling in Potters Brook
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
How do I book?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed price.
Can you do the outside of a roll-top?
Yes. Inside and out.
I’m a tenant. Can you help?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
How we handle bath re-enamelling in Potters Brook
Re-enamelling is a one-day job for most baths. Taps, tiles, panels and plumbing all stay in place. Whether it’s an outdated colour you’d like to change and an old resurfacing that’s failing, we can help, on Victorian roll-tops, pressed steel baths and acrylic baths alike.
Big or small, you get the same one-year guarantee in Potters Brook and across Lancashire.
- Area
- Potters Brook (LA2)
- County
- Lancashire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Potters Brook and the surrounding area
Potters Brook is about 6 miles south of Lancaster, in Lancashire. We travel to customers in Potters Brook, so there is no workshop to go to. We cover all 482 towns and villages in Lancashire. Our jobs stretch from Potters Brook to Liverpool (39 miles away).
We cover every part of LA2. That includes homes on Potters Brook, Preston Lancaster Road and Cockerham Road. We also travel to Bay Horse (1 mile north-east), Forton (1 mile south), Hampson Green (1 mile north), Hollins Lane (1 mile south-east) and Shireshead (1 mile south-east). Further out, we also cover Preston (14 miles south), Lancaster (6 miles north), Morecambe (8 miles north-west), Fulwood (13 miles south), Fleetwood (11 miles west) and Thornton (11 miles south-west).
What’s near Potters Brook
Locally, our jobs take us to homes close to Forton Primary School and St James' Church and the streets around them. A little further out are Royal Lancaster Infirmary (5.3 miles north) and Greenhalgh Castle (4.6 miles south). Open spaces near Potters Brook include Nicky Nook and Winmarleigh and Cockerham Moss.
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Prices and what affects them
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- Whether it’s a chip, crack, burn or wear
- How easy the damage is to reach
- How much damage there is
- The material and finish
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- What it’s made of, if you know
- One sharp close-up of the damage
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Nearby places to Potters Brook
What else we do in Potters Brook
Looking after it afterwards
Simple care helps the repair last. Our advice:
- Don’t use the bath until it has fully cured
- Have chips seen to early
- Keep toiletries on a shelf rather than in the bath
- Dry the bath after use to stop limescale
Wipe the bath dry after use where you can, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Should you replace it?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. We charge the same wherever you are, with no extra for Potters Brook. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why us?
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Free fixed quotes from pictures
Read our prices page and guide to resurfacing and replacement costs.
What we are called out for in Potters Brook
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Keep an eye out for any of the following:
- A coloured bath you want in white
- An old resurfacing that’s failing
- Brown or grey marks that don’t clean off
- Several chips and rust patches
What your quote should include
- Whether the colour is mixed to match
- What preparation is included
- How the room is protected while they work
- Aftercare advice
How the visit works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job typically takes most of the day. We clean up when we are done and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Mention any earlier repairs or resurfacing
- Clear toiletries, mats and anything else from around the area
- Open a window if you can
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
Landlord and trade work in Potters Brook
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
About our accreditations · Every repair comes with a one-year guarantee.
