Hampshire · England
Bath re-enamelling & resurfacing in Littleton, Hampshire
Our repair technicians come to Littleton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Bath re-enamelling in Littleton without replacing anything
Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. You end up with a smooth, glossy surface. Typical jobs include a roll-top that’s seen better days and staining under the taps and around the waste, in acrylic baths, cast iron baths and pressed steel baths.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Area
- Littleton (SO22)
- County
- Hampshire
- Warranty
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We’ll always be straight with you, so here’s what a repair will not do:
- A poorly supported acrylic bath, until it’s firmed up
- Leaks from fittings rather than the bath
- A bath that’s rusted through
Not sure? Send photos and we will give you a straight answer before you book.
Materials we repair
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
Nearby places to Littleton
Other services in Littleton
How the visit works
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take a full day, tidy-up included.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s usually ready the day after.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Let us know if it has been repaired before
- Ensure the area is dry
Get a quote
For a price in Littleton, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Littleton: your questions answered
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
How durable is a resurfaced bath?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Do you resurface freestanding baths?
Yes. Inside and out.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you cover Littleton?
Yes. We cover the whole UK and travel to Littleton and the rest of Hampshire. Send us pictures for a fixed quote, or call 0345 017 0787.
What happens next?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Looking after it afterwards
How the surface is treated afterwards matters:
- Fix dripping taps quickly
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
- Stick to gentle, non-abrasive cleaners
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
About Littleton
Littleton is about 2 miles north-west of Winchester, in Hampshire. From the centre of Littleton to the outlying streets, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Our repair technicians cover all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Littleton to London (about 61 miles away).
Jobs in SO22 work the same way as everywhere else we cover. Jobs here include addresses on Rutledge Drive, Fyfield Way and Hilden Way. We also cover the places around Littleton: Harestock (1 mile south-east), Weeke (1 mile south-east), Sparsholt (1 mile south-west), Westley (2 miles west) and Abbotts Barton (2 miles south-east). We also work in nearby towns such as Eastleigh (8 miles south), Andover (10 miles north-west), Totton (13 miles south-west), Chandler's Ford (7 miles south), Hedge End (12 miles south) and Romsey (9 miles south-west).
Near you in Littleton
In Littleton, that means homes near Harestock Primary School, Church of St Catherine and Henry Beaufort School, among other places. For rail, the closest station is Winchester station, roughly 1.9 miles south-east of the centre. Well-known places in the area include Royal Observer Corps Museum (1.8 miles south-east) and Royal Hampshire County Hospital (1.9 miles south-east). Not far away are Winnall Moors and Twyford Down.
Repair or replace in Littleton?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Littleton
- We leave the room as we found it
- Everything repaired in place
- Work done at your home or business
- One price list for the entire UK
Read our prices page and bath cost comparison.
Do you need bath re-enamelling in Littleton?
Older baths often have several problems at once: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Common reasons people in Littleton contact us include:
- A bath in a colour that no longer suits
- Lots of chips and rust spots
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
Before you book anyone
- Whether a trained technician does the job
- What aftercare is recommended
- What prep work is covered
- What happens if the damage is worse than the photos show
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For landlords and businesses
Landlords, letting agents and housing providers in Littleton use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
About our accreditations · Every repair comes with a one-year guarantee.
